Gator G-TOUR 12U Rack Case
The Gator G-TOUR 12U is the full-size case in the G-TOUR standard rack line, holding twelve rack spaces of touring or installed gear in a 9mm plywood shell with a laminated exterior. A tongue-and-groove extruded aluminum valance seals the lid, and reinforced ball corners carry the load where a heavy rack actually lands when it comes off a truck.
Steel rails 3.2mm thick run front and rear with 17 inches of usable rack depth, so a full 12U of amps, processing, and power conditioning is supported at both ends instead of hanging on the front rails. Red recessed twist latches stay flush for stacking, and spring-loaded rubber-gripped handles keep a rack this size manageable through load-in and load-out. The rack opening is 21.00 inches tall on a 19-inch width; the case measures 25.75 x 21.50 x 23.50 inches outside and weighs 63.95 pounds empty.
| Rack Units | 12U |
|---|---|
| Usable Rack Depth | 17 in |
| Interior Dimensions (L x W x H) | 16.50 x 19.00 x 21.00 in |
| Exterior Dimensions (L x W x H) | 25.75 x 21.50 x 23.50 in |
| Weight | 63.95 lb |
| Construction | 9mm plywood with laminated exterior |
| Rack Rails | 3.2mm steel, front and rear |
| Valance | Tongue-and-groove extruded aluminum |
| Hardware | Recessed twist latches, spring-loaded rubber-gripped handles, reinforced ball corners |













