Gator G-TOUR ATA Case for 15-Inch and 18-Inch Subwoofers
A subwoofer is the heaviest single box in most PA rigs and the one most likely to get dragged across a loading dock. This G-TOUR case wraps it in 9mm plywood with a laminated exterior, reinforced ball corners and commercial-grade plated hardware, and includes eight EVA foam inserts (each 5.9 x 6.5 x 0.78 in) so the cabinet can be shimmed to a firm fit rather than rattling in an oversized cavity.
An aluminum valance pulls the lid down tight to the base, and Gator red recessed twist latches with spring-loaded rubber grip handles keep it quick to work with. Four heavy-duty 4 in casters (two locking) roll it loaded, and caster dishes recessed into the lid let a second case sit on top without walking off during transit. The 15 in version measures 26.625 x 23.25 x 32.875 in at 76 lb empty; the 18 in version is 29.5 x 28.75 x 36.25 in at 87 lb.
| Construction | 9mm plywood, laminated exterior, reinforced ball corners |
|---|---|
| Seal | Aluminum valance for a tight lid-to-base fit |
| Mobility | Four 4 in casters, two locking |
| Stacking | Caster dishes recessed into the lid |
| Included Foam | Eight EVA inserts, 5.9 x 6.5 x 0.78 in |
| 15 in Version | Interior 21 x 24.3 x 25 in - exterior 26.625 x 23.25 x 32.875 in, 76 lb |
| 18 in Version | Interior 27.1 x 26.3 x 28.2 in - exterior 29.5 x 28.75 x 36.25 in, 87 lb |
| Latches | Red recessed twist latches, spring-loaded rubber grip handles |












