Skip to content
G&G Technologies 201-791-1400 Search Cart

Soft, Hard and Rack Cases: Which One Fits Your Gear

A soft case is the lightest way to carry gear from room to room. A hard case adds a rigid shell for trucks and baggage handlers. A rack case is built around rack rails, so you size it by rack units and rail depth. These eight cases from SKB, Gator and NANUK show where the weight and the protection change.

The 8 Picks

Soft cases
Hard cases
Rack cases
Rack space
1U
2U
Not listed
Not listed
2U
4U
10U
10U
Usable depth
14.5 in
Not listed
Not listed
Not listed
Not listed
17 in
17.5 in
20 in
Weight
7.63 lb
8 lb
2.63 lb
11.6 lb empty
23 lb
28.67 lb
25.18 lb
56.2 lb
Construction
Wood core, 600 denier nylon
600 denier nylon, aluminum valance
600 denier padded exterior
Not listed
Not listed
9 mm plywood, laminated exterior
Roto-molded polyethylene, gasket-sealed lids
Not listed
Notable
Not listed
Interior: 12.5 x 19 x 3.5 in
Not listed
Interior: 20.5 x 11.3 x 7.5 in; Rating: IP67, waterproof and dustproof; Foam: Cubed, custom, dividers or empty
Rack depth: 13 in; Sealing: Watertight gasket, MIL-STD-C-4150J
Not listed
Not listed
Shock mount: Elastomer isolators at 8 corners
Use it for
One wireless receiver or small processor carried by hand. It has a shoulder strap, a zippered pouch for cables and body packs, and a front pouch for antennas, so the small parts travel with the receiver.
Effects processors, recorders or sound modules, because it holds 2U of gear at 8 lb. A rear flap opens to the whole back panel without taking the gear out.
A compact mixer, drum machine or recording interface, since at 2.63 lb it adds almost no weight. It has a padded shoulder strap, a carrying handle and a padded outside pocket for an iPad or cables.
Loose gear that flies or ships, because it is rated IP67 and approved as airline carry-on. It has wheels, a retractable handle and a pressure release valve. It is not a rack case.
A short two-unit rack that ships or travels in the rain, since its gasket seal meets MIL-STD-C-4150J. The latches are Travel Sentry approved, and the case carries a lifetime warranty to the original owner.
Mixers, amps and processors on tour, because 4U and 17 inches of depth fit a typical mixer or amp. It has front and rear 3.2 mm rack rails, recessed twist latches and spring-loaded handles.
A full 10U rack in a sealed roto-molded shell, with interlocking stacking bars and non-slip feet, so several cases stack and stay put.
Sensitive or deep gear that rides in a truck or ships, because it has 20 inches of depth and shock isolation. The rack frame floats inside the shell on adjustable shock absorbers.
Price
$109.99
$179.99
$94.99
$319.95
$459.99
$344.99
$354.99
$934.99
Soft cases
SKB 1U Soft Rack Series
SKB 1U Soft Rack Series
Specs
Rack space
1U
Usable depth
14.5 in
Weight
7.63 lb
Construction
Wood core, 600 denier nylon
Use it for
One wireless receiver or small processor carried by hand. It has a shoulder strap, a zippered pouch for cables and body packs, and a front pouch for antennas, so the small parts travel with the receiver.
$109.99
Gator 2U Lightweight Rack Bag
Gator 2U Lightweight Rack Bag
Specs
Rack space
2U
Weight
8 lb
Construction
600 denier nylon, aluminum valance
Notable
Interior: 12.5 x 19 x 3.5 in
Use it for
Effects processors, recorders or sound modules, because it holds 2U of gear at 8 lb. A rear flap opens to the whole back panel without taking the gear out.
$179.99
SKB UB Series 1818 Bag
SKB UB Series 1818 Bag
Specs
Weight
2.63 lb
Construction
600 denier padded exterior
Use it for
A compact mixer, drum machine or recording interface, since at 2.63 lb it adds almost no weight. It has a padded shoulder strap, a carrying handle and a padded outside pocket for an iPad or cables.
$94.99
Hard cases
NANUK 935 Hard Case
NANUK 935 Hard Case
Specs
Weight
11.6 lb empty
Notable
Interior: 20.5 x 11.3 x 7.5 in; Rating: IP67, waterproof and dustproof; Foam: Cubed, custom, dividers or empty
Use it for
Loose gear that flies or ships, because it is rated IP67 and approved as airline carry-on. It has wheels, a retractable handle and a pressure release valve. It is not a rack case.
$319.95
SKB 2U iSeries Injection Molded Fly Rack - 13" 3i-2215M82U
SKB 2U iSeries Injection Molded Fly Rack - 13" 3i-2215M82U
Specs
Rack space
2U
Weight
23 lb
Notable
Rack depth: 13 in; Sealing: Watertight gasket, MIL-STD-C-4150J
Use it for
A short two-unit rack that ships or travels in the rain, since its gasket seal meets MIL-STD-C-4150J. The latches are Travel Sentry approved, and the case carries a lifetime warranty to the original owner.
$459.99
Rack cases
Gator G-TOUR 4U Rack Case
Gator G-TOUR 4U Rack Case
Specs
Rack space
4U
Usable depth
17 in
Weight
28.67 lb
Construction
9 mm plywood, laminated exterior
Use it for
Mixers, amps and processors on tour, because 4U and 17 inches of depth fit a typical mixer or amp. It has front and rear 3.2 mm rack rails, recessed twist latches and spring-loaded handles.
$344.99
SKB 10U rSeries Rack
SKB 10U rSeries Rack
Specs
Rack space
10U
Usable depth
17.5 in
Weight
25.18 lb
Construction
Roto-molded polyethylene, gasket-sealed lids
Use it for
A full 10U rack in a sealed roto-molded shell, with interlocking stacking bars and non-slip feet, so several cases stack and stay put.
$354.99
SKB 10U 20-inch Deep rSeries Shock Rack
SKB 10U 20-inch Deep rSeries Shock Rack
Specs
Rack space
10U
Usable depth
20 in
Weight
56.2 lb
Notable
Shock mount: Elastomer isolators at 8 corners
Use it for
Sensitive or deep gear that rides in a truck or ships, because it has 20 inches of depth and shock isolation. The rack frame floats inside the shell on adjustable shock absorbers.
$934.99

What Matters

The SKB 1U soft rack weighs 7.63 lb and the Gator 2U rack bag 8 lb, both with a 600 denier nylon exterior. A bag this light carries a wireless receiver or processor to the stage, because you are not adding a heavy shell to gear that only moves by hand.

The SKB iSeries 2U rack is gasket-sealed to MIL-STD-C-4150J. The NANUK 935 is rated IP67 and approved as airline carry-on. The shell costs weight: 23 lb for the SKB 2U, 11.6 lb empty for the NANUK. The extra weight buys sealing against water and dust.

One rack unit (U) is 1.75 inches of panel height. Check the usable depth against your deepest piece of gear as well as the unit count, because gear that fits the panel can still be too deep to close the lid. The SKB iSeries 2U gives 13 inches, the Gator G-TOUR 4U 17 inches, the SKB 10U rack 17.5 inches and the SKB 10U shock rack 20 inches.

In the SKB 10U shock rack the internal frame sits on adjustable elastomer shock absorbers at all eight corners, controlling shock and vibration on three axes, so hard knocks reach the gear more gently. It weighs 56.2 lb empty, against 25.18 lb for the standard SKB 10U rack, and that added weight is the cost of the isolation.

Questions? Talk to a Person.

Call (201) 791-1400 or email [email protected] - we've handled pro audio & video since 1988.