Best SDI Encoders: SDI to IP Streaming Compared
Short answer. SDI to a platform in HD: the Blackmagic Streaming Encoder HD or the Magewell Ultra Stream SDI, which also records. SDI in Ultra HD: the Blackmagic Streaming Encoder 4K. DCI 4K60 with bonded cellular for field work: the Teradek Prism Flex Mk II. SDI onto an NDI network over a single PoE+ cable: the BirdDog BD4KSDI. One SDI source to many kinds of destination, including SRT, NDI and RIST: the Magewell Ultra Encode SDI Plus. Going the other way, from an IP stream back to SDI, takes a decoder such as the Datavideo NVD-35.
The 6 Picks

Specs
- Input
- 12G-SDI
- Codec
- H.264
- Protocols
- SRT, RTMP
- Use it for
- A 12G-SDI source that needs an HD stream, using the built-in Ultra HD to HD downconverter, so no separate converter is needed.

Specs
- Input
- SDI with loop-through
- Codec
- H.264 or HEVC
- Protocols
- RTMP, RTMPS, RTSP
- Max input
- 2048x1080 60fps
- Power
- DC 5V/2A; Max power consumption: ~7.2 W
- Notable
- Record: Internal storage, USB drive
- Use it for
- An SDI camera streaming to two servers at once, with a local MP4 or MOV recording, because it writes the file on the unit itself.

Specs
- Input
- SDI with loop-through
- Codec
- H.264 or HEVC
- Protocols
- RTSP, RTMP, RTMPS, SRT, NDI HX2, NDI HX3, HLS, TS over UDP and RTP, TVU ISSP, ZIXI, RIST
- Max input
- 2048x1080 60fps
- Power
- DC 5V/3A; Max power consumption: 8.72W
- Notable
- Record: Internal storage, USB, network storage
- Use it for
- One SDI source going to several kinds of destination, including SRT, NDI and RIST, with recording, because it supports all of those protocols in one unit.

Specs
- Input
- 12G-SDI
- Codec
- H.264 and H.265
- Protocols
- SRT, RTMP
- Use it for
- Streaming an Ultra HD SDI source over SRT or RTMP, because its 12G-SDI input takes Ultra HD directly.

Specs
- Input
- 12G-SDI, with 12G-SDI output
- Protocols
- NDI full bandwidth, NDI HX2/3
- Max input
- UHD 3840x2160 60fps
- Power
- PoE+ 802.3at
- Use it for
- An SDI camera joining an NDI network, powered over the network cable, so one run does both jobs.

Specs
- Input
- 12G-SDI and HDMI 2.0
- Codec
- HEVC/AVC
- Protocols
- RTMP, RTMPS, SRT, RIST, HLS, MPEG-TS including multicast
- Max input
- DCI 4K60 4:2:2 10-bit
- Use it for
- Field and remote broadcast work: bonds Wi-Fi, Ethernet and cellular data into one connection, so a weak link does not end the stream.
Browse the Shelf
What Matters
Match the encoder to the highest format your sources send, because an input that tops out lower cannot take the signal at all. The Blackmagic Streaming Encoder 4K, the Teradek Prism Flex Mk II and the BirdDog BD4KSDI take 12G-SDI for Ultra HD or better. The Blackmagic Streaming Encoder HD also has a 12G-SDI input, with a built-in Ultra HD to HD downconverter. The Magewell Ultra Encode SDI Plus and Ultra Stream SDI take up to 2048x1080 at 60 fps.
Broadcast work usually means 10-bit 4:2:2, SRT or RIST for contribution links, and a way to keep going if one connection drops. 10-bit 4:2:2 keeps more colour detail for later work. The Teradek Prism Flex Mk II encodes DCI 4K60 4:2:2 10-bit, sends SRT, RIST, RTMP, RTMPS, HLS and MPEG-TS including multicast, and bonds Wi-Fi, Ethernet and cellular data. The Magewell Ultra Encode SDI Plus adds RIST, ZIXI and TVU ISSP.
RTMP and RTMPS feed streaming platforms. SRT suits a link over the internet. NDI sends video across a local network. Pick by where the stream goes, because each destination expects its own protocol. The Blackmagic encoders send SRT or RTMP, the Magewell Ultra Encode SDI Plus adds NDI HX2 and HX3 plus RIST, and the BirdDog BD4KSDI sends NDI at full bandwidth or HX2/3.
A loop-through output sends the SDI signal on to a monitor or recorder, so the encoder does not take the only connection and you can monitor or record the same feed. The Magewell Ultra Stream SDI and Ultra Encode SDI Plus pass the input signal through, and the BirdDog BD4KSDI has a 12G-SDI output.
With PoE+ one cable carries power and network, which helps where no outlet is near the camera. The BirdDog BD4KSDI runs on PoE+ 802.3at and the Magewell Ultra Encode SDI Plus lists PoE. For a record copy, the Magewell Ultra Stream SDI writes MP4 or MOV to internal storage or a USB drive, and the Ultra Encode SDI Plus also records to network storage.
Each of these models encodes one SDI source. To stream several cameras, use one encoder per camera or choose a multi-channel unit such as the BirdDog 4K QUAD, covered in the general streaming encoder guide.
Questions
It depends on the format and the destination, because the encoder has to take your SDI speed and send the protocol your destination expects. The Blackmagic Streaming Encoder 4K takes 12G-SDI and streams over SRT or RTMP, the BirdDog BD4KSDI sends NDI over PoE+, and the Teradek Prism Flex Mk II encodes up to DCI 4K60 with bonded connections for field work.
A device that takes a video signal from an SDI connector and sends it as a stream over a network, so the SDI output of a camera can reach platforms and IP systems. The Blackmagic Streaming Encoder 4K, for example, takes a 12G-SDI input and streams over SRT or RTMP.
Use an SDI encoder for the protocol you need: RTMP or RTMPS for a platform, SRT for a link over the internet, NDI for a local network, because each destination reads a different one. The Magewell Ultra Encode SDI Plus sends all three, and the BirdDog BD4KSDI sends NDI.
The Blackmagic Streaming Encoder 4K, the Teradek Prism Flex Mk II and the BirdDog BD4KSDI take 12G-SDI. The BirdDog supports UHD 3840x2160 at up to 60 fps and sends NDI. 12G-SDI is the speed that carries Ultra HD on one cable.
Yes. The Magewell Ultra Stream SDI streams to servers or platforms over RTMP or RTMPS, and the Blackmagic encoders send RTMP or SRT.
Questions? Talk to a Person.
Call (201) 791-1400 or email [email protected] - we've handled pro audio & video since 1988.
