TriCaster Mini X vs ATEM Mini Pro ISO vs RGBlink Mini-ISO
These three sit on a desk and switch four cameras, but they are built differently. The Vizrt TriCaster Mini X is a production computer: four HDMI inputs on the box, up to eight NDI sources over the network, four recording channels and two stream outputs, run from a monitor and mouse or a separate Vizrt panel. The Blackmagic ATEM Mini Pro ISO is a hardware switcher with its buttons on top, four HD HDMI inputs, and a recording of every input plus the program for editing later. The RGBlink mini-ISO adds four SDI inputs, a touch screen, a T-bar and a PTZ joystick, but despite its name RGBlink states it does not record each input separately.
Side by Side

Specs
- Camera inputs
- 4 HDMI
- Input resolution
- Up to 2160p59.94 on NDI inputs
- NDI
- 8 NDI video inputs; NDI mix outputs (4 independent or 1 UHD)
- ISO recording
- 4 recording channels from NDI inputs or mix outputs
- Streaming
- 2 independent stream outputs, with stream archive
- Video outputs
- 4 DisplayPort
- Multiview
- UI and multiview on the GPU monitor outputs
- Control
- Software interface; Vizrt sells separate TriCaster control panels
- PTZ camera control
- Up to 8 PTZ cameras over serial or IP
- Audio inputs
- Mic in and balanced stereo in
- Network
- 1GbE and 2.5GbE

Specs
- Camera inputs
- 4 HDMI, 10-bit HD
- Input resolution
- Up to 1080p60
- ISO recording
- All 4 HDMI inputs plus program as H.264 .mp4 (up to 70 Mb/s), separate .wav audio, DaVinci Resolve project file
- Streaming
- RTMP and SRT over Ethernet or a shared USB-C connection
- Video outputs
- 1 HDMI program output; USB-C webcam out
- Multiview
- 10 views: program, preview, 4 inputs, media player, stream and record status, audio meters
- Control
- Built-in control panel; optional ATEM hardware panels and free ATEM Software Control
- Audio inputs
- 2 x 3.5mm stereo mini jack, with mic plug-in power
- Network
- 10/100/1000 Ethernet

Specs
- Camera inputs
- 4 HDMI 2.0 and 4 SDI, switched as 4 HDMI/SDI channels
- Input resolution
- Up to 4K60 on HDMI
- NDI
- 1 NDI/UVC input channel; 1 NDI encoder output
- ISO recording
- No per-input ISO recording; program to USB 2.0 disk at up to 16 Mbps
- Streaming
- RTMP(S) to up to 4 platforms at once
- Video outputs
- 2 HDMI 1.3; USB 3.0 webcam out (YUY2 or MJPEG)
- Multiview
- Multiview, program or test pattern on either HDMI output
- Control
- 3.5-inch touch screen, T-bar, 5-direction PTZ joystick; TAO Cloud control
- PTZ camera control
- Up to 5 PTZ cameras over IP VISCA
- Audio inputs
- Line and mic level, 2 channels of external audio
What Matters
A production that already runs on NDI, or needs more than four sources, several recordings and two separate streams, with an operator at a computer screen.
Four HDMI cameras switched from buttons on the unit, when you want every camera recorded clean so the show can be re-cut in DaVinci Resolve afterwards.
Cameras with SDI outputs, PTZ cameras you want to drive from a joystick on the switcher, or one program sent to up to four streaming platforms at once. Pick something else if you need separate per-camera recordings.
Questions
The TriCaster Mini X is Vizrt's compact production system. The hardware has 4 HDMI inputs, takes up to 8 NDI sources over the network, records 4 channels, sends 2 separate streams and drives its interface and multiview over 4 DisplayPort outputs. Vizrt also sells it as software only (TriCaster Mini S) for certified hardware.
RGBlink states the mini-ISO does not record each input separately; it records the program to a USB disk. The ATEM Mini Pro ISO records all 4 HDMI inputs and the program as separate files with a DaVinci Resolve project. The mini-ISO adds 4 SDI inputs, 4K60 HDMI input, a touch screen, a T-bar, a PTZ joystick and streaming to up to 4 platforms at once.
Yes. Vizrt lists 8 NDI video inputs and NDI mix outputs, configurable as 4 independent outputs or 1 UHD output.
Questions? Talk to a Person.
Call (201) 791-1400 or email [email protected] - we've handled pro audio & video since 1988.
