Ceiling Microphones for Meeting Rooms and Classrooms
A ceiling microphone takes the microphones off the table. Five things decide which one fits: how much floor one unit covers at your ceiling height, how it connects, whether it cancels echo itself or needs a DSP, how it gets power, and whether it sits in the ceiling or hangs from it. The eight picks run from lowest price to highest, from a single flush-mount capsule to an array that covers 30 by 30 feet. There is a gap in the middle: above the Vaddio and Audix pendants, the next step is a beamforming array.
The 8 Picks

Specs
- Coverage
- One capsule, aims up to 45 degrees
- Connection
- Terminal block
- Echo cancelling
- None listed
- Mount
- Flush in a 2-inch hole; plenum-rated box included
- Use it for
- A small room or distance-learning space that already has a mixer or DSP with echo cancelling.

Specs
- Coverage
- 360 degrees from three cardioid elements; one covers an average meeting table
- Connection
- Dante
- Echo cancelling
- Yes, in the interface box
- Power
- PoE, one Cat-5e cable
- Mount
- Pendant, 3 ft drop cable extends to 15 ft
- Use it for
- A meeting table under a drop or open ceiling on a Dante network, with echo cancelling in the microphone's own interface box.

Specs
- Coverage
- 360 degrees from three cardioid elements; one covers an average meeting table
- Connection
- Dante, plus one powered speaker output
- Echo cancelling
- Yes, built in
- Power
- PoE+ (25 W speaker output) or PoE (15 W)
- Mount
- Pendant, 3 ft drop cable extends to 15 ft
- Use it for
- A classroom or meeting room that needs a microphone and a powered output for a passive speaker from one network cable.

Specs
- Coverage
- Three hypercardioid capsules
- Connection
- Dante and AES67 through the included DN43 interface
- Echo cancelling
- None listed; the DN43 has preamp gain and filters
- Power
- DN43 on 802.3af PoE
- Mount
- Hanging, adjustable cable length
- Use it for
- A Dante system that already has a DSP, where a hanging three-capsule microphone suits the ceiling better than an array.

Specs
- Coverage
- 6 output channels, up to 32 pickup zones, 90 degree beams
- Connection
- Dante, two network ports
- Echo cancelling
- Yes, with automix, noise reduction and AGC
- Power
- PoE, 802.3af Class 0
- Mount
- Flush (tile bridge included), surface or VESA; UL 2043
- Use it for
- Classrooms and meeting rooms that need several pickup zones, exclusion zones for HVAC noise, and voice lift.

Specs
- Coverage
- 20 x 20 ft (6.1 x 6.1 m), resizable down to 10 x 10 ft; mount up to 12 ft
- Connection
- Dante and AES67
- Echo cancelling
- Yes, IntelliMix on board
- Power
- PoE, Class 0
- Mount
- Round; surface mount and VESA bracket in the box
- Use it for
- A room up to 20 by 20 feet with a ceiling no higher than 12 feet. Several units cover a larger room.

Specs
- Coverage
- 20 x 20 ft (6 x 6 m); mount up to 10 ft
- Connection
- Dante and AES67; USB to the room PC through the ANIUSB-MATRIX in this kit
- Echo cancelling
- Yes, IntelliMix on board
- Power
- PoE+, Class 4
- Mount
- 2 ft square with a built-in 2.5 in loudspeaker; ceiling, pole or wire rope suspension
- Use it for
- A small or medium room run from a PC with no DSP: microphone and loudspeaker in one ceiling unit, and USB to the computer.

Specs
- Coverage
- 30 x 30 ft (9 x 9 m) by default, up to 8 coverage areas; mount up to 12 ft
- Connection
- Dante and AES67, two RJ45 ports
- Echo cancelling
- Yes, AI echo cancellation, denoiser and deverb on board
- Power
- PoE, Class 0, on the primary port
- Mount
- Fits 2 ft and 60 cm tile grids; suspension, pole or VESA
- Use it for
- Large conference rooms and multi-purpose spaces, with up to eight coverage areas from one array.
Browse the Shelf
What Matters
Measure the seating area and the ceiling first. Shure rates the MXA901 at 20 by 20 feet (6.1 by 6.1 m) with a maximum recommended mounting height of 12 feet (3.7 m), and the MXA902 at 20 by 20 feet with a 10 foot (3 m) maximum. The MXA925 covers 30 by 30 feet (9 by 9 m) by default and mounts up to 12 feet; Shure says it can go higher in rooms with controlled acoustics. Vaddio says one EasyIP CeilingMIC covers an average meeting table and adds more microphones for bigger rooms. A room larger than one unit covers needs a second unit.
The Audix M70W ends in a terminal block and wires to a mixer or DSP input. The Vaddio pendants send Dante, and the Audix M3 kit sends Dante and AES67 through its DN43 interface. The Audio-Technica ATND1061 sends Dante, and the three Shure arrays send Dante and AES67. A room PC running Zoom or Teams without a DSP needs USB: the MXA902W-S-USB kit includes Shure's ANIUSB-MATRIX, which connects to the computer by USB.
The ATND1061 has automixing, echo cancellation, noise reduction and automatic gain control built in, and Audio-Technica says that removes the need for an external DSP. The Shure arrays run IntelliMix with echo cancellation on board, and the MXA925 adds AI noise and reverb reduction. The Vaddio pendants cancel echo in their interface box. Audix lists no echo cancelling for the M70W or the M3 kit, so the DSP or codec they feed has to do it. Without echo cancelling, people on the far end hear themselves back through the room speakers.
Every networked pick here runs on PoE. Shure lists the MXA901 and MXA925 for Class 0 PoE, Audio-Technica lists the ATND1061 at IEEE 802.3af Class 0, and the Audix DN43 interface runs on 802.3af. The MXA902 needs PoE+ (Class 4): on plain PoE its loudspeaker does not play. The Vaddio CeilingMIC/AMP D gives its speaker output 25 W on PoE+ and 15 W on PoE. Add up the switch's PoE budget before ordering several arrays.
The square MXA925 fits standard 2 foot and 60 cm ceiling tile grids, and the MXA902 is a 2 foot or 60 cm square. The ATND1061 mounts flush in a drop or hard ceiling, on the surface or on a VESA mount, and is UL 2043 rated for plenum spaces. The round MXA901 ships with a surface mount and a VESA bracket. The Audix M70W sits flush in a 2-inch hole. The Vaddio and Audix M3 pendants hang on a cable; the Vaddio drop cable is 3 feet and extends to 15 feet, which brings the microphone down toward the talkers under an open ceiling.
Questions
Measure the room before choosing. One Shure MXA925 covers 30 by 30 feet by default and an MXA901 covers 20 by 20 feet, so a bigger classroom takes two arrays. Audio-Technica names classrooms for the ATND1061, and its voice lift feature is built to let everyone in a large room hear the person speaking, however far away they sit. For a smaller room, the Vaddio EasyIP CeilingMIC/AMP D pairs a ceiling microphone with an output for a passive speaker on one network cable.
For a room up to 20 by 20 feet with a ceiling no higher than 12 feet, the Shure MXA901 covers it and cancels echo itself. If the room runs from a PC with no DSP, the MXA902 kit adds a loudspeaker and a USB connection, with a 10 foot mounting limit. Past 20 by 20 feet, the MXA925 covers 30 by 30 feet from one array. The Audio-Technica ATND1061 gives six output channels and up to 32 zones when seats need separate pickup.
Questions? Talk to a Person.
Call (201) 791-1400 or email [email protected] - we've handled pro audio & video since 1988.
