Autoscript EVO-IP19 19-inch On-Camera IP Prompt Monitor Package
The EVO-IP19 gives a presenter the largest reading surface in the EVO-IP range while keeping the head to 41mm of depth and 3.9 kg of monitor. It is the choice for studio pedestals and larger ENG builds where a bigger script column matters more than shaving weight off the front of the camera. The panel runs 1280 x 1024 at 1500 nits with 1000:1 contrast, so line length and legibility hold up under studio lighting and outdoors.
Scroll engine functionality is built in, so the monitor connects directly to WinPlus-IP over the network and there is nothing to rack, power, or fail between the prompting PC and the glass; dual HD-SDI and dual CVBS inputs handle on-air feeds and existing scroll boxes. Connections are grouped on a rear panel for cable management, and the integral backplate carries the Intelligent Prompting mounting system, which reduces the parts count and holds lens-to-monitor alignment. Timecode arrives as LTC or NTP, four tally lights give roughly 270 degrees of visibility, and power is a 4-pin XLR at 12-16.8VDC drawing 29W. Adding the E.P.I.C. talent monitor later converts the head to an EPIC-IP.
| Size | 19" |
|---|---|
| Brightness | 1500 nits |
| Resolution | 1280 x 1024 SXGA |
| Contrast | 1000:1 |
| Script Inputs | LAN, 2x HD-SDI, 2x CVBS |
| Timecode Inputs | LTC, NTP (VITC, D-VITC optional) |
| Power Input | 4-pin XLR, 12-16.8VDC |
| Power consumption | 29W |
| Dimensions | 467 x 399 x 41mm / 18.4 x 15.7 x 1.6" |
| On-camera package weight | 11.5 kg / 25.4 lb |













