OConnor ARRI Style Dovetail Plate

If the camera already rides on an ARRI standard bridge plate, these remove a layer from the stack. Each plate slides into the OConnor head's own platform release and presents an upper ARRI dovetail on top, so the bridge plate goes on directly instead of onto an adapter onto a plate. Both incorporate an easy-load safety latch.

C1249-1001 is the 12 in plate for the larger heads. It snaps into the platform slide release of any Ultimate 2060, 2065, 2560, 2575 or 120EX, and it carries mounting points for rack gear so a 120EX can drive a heavy feature payload fore and aft while balancing. It measures 3.75 in (95 mm) wide, 0.875 in (22 mm) high, 14.5 in (362 mm) minimum length, and weighs 1.65 lb (0.75 kg). C1249-1002 is the shorter plate for the 1030 and 1040 heads, used as an alternative to the standard 1030/1040 release plate for a lower overall profile: 3.5 in (89 mm) wide, 0.875 in (22 mm) high, 12.25 in (312 mm) minimum length, 1.2 lb (0.55 kg).