MuxLab 500755 AUDIO / RS232 over IP PoE Transceiver
The 500755 extends 2-channel audio up to 330ft (100m) over Cat5e/6 point to point, and further over an existing Ethernet network. Connect several transceivers to the same LAN and the link becomes point-to-multipoint or multipoint-to-multipoint, with hundreds of units supported depending on available bandwidth.
RS232 and IR travel alongside the audio, so control follows the sound to each zone. The unit takes PoE from a standard switch. Related parts in this family include the 70V audio converter for constant-voltage speaker lines and the transmitter and receiver versions with a built-in 50W-per-channel amplifier or microphone input.
| Standard | 2CH Analog Audio |
|---|---|
| Signal Format | 2CH analog audio ( in or out ) SPDIF Out (2CH digital audio) |
| Bandwidth | 20Hz to 20KHz |
| Latency | 30ms |
| Cable | One (1) Cat 5e/6 or better twisted pair cables required |
| Power Consumption | Transmitter: 2.9W Receiver: 1.8W |
| Power | Source This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a |
| PoE | (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately |












