Electro-Voice Sx100+ Passive Loudspeaker
The Sx100+ is the small end of the Sx range: a 12 inch two-way in a copolymer cabinet, light enough to carry in one hand and efficient enough that a modest amplifier gets it to useful level. It is the box for speech reinforcement, a school hall, a DJ rig or an AV cart, where the job is intelligibility rather than weight.
A 1.25 inch DH3 titanium compression driver on a 65 by 65 degree Varipath constant-directivity horn keeps the pattern tight enough to aim at an audience and away from a wall. Ring-Mode Decoupling damps the cabinet resonances that smear speech. Order it in black or in the white WE finish for a room where a black box would show.
| Frequency response (-10 dB) | 60 Hz - 25 kHz |
|---|---|
| Sensitivity | 98 dB |
| Maximum SPL | 127 dB |
| Coverage (horizontal) | 65° |
| Coverage (vertical) | 65° |
| Power handling | 200W Continuous, 800W Peak |
| LF transducer | 12 in (300mm) |
| HF transducer | 1 in (25mm) exit DH3 Comp. Driver |
| Impedance | 8 ohms Nominal, 5.6 ohms Min. |
| Connectors | Neutrik Speakon ® |
| Enclosure material | Copolymer |
| Dimensions (H x W x D) | 23.1 in x 16.9 in x 12.3 in (586 x 429 x 312mm) |
| Net weight | 32 lbs (14.5 kg) |









