Vaddio RoboSHOT IW Smart Glass OneLINK HDMI System (Primed)

This RoboSHOT IW system pairs the in-wall smart-glass PTZ camera with a OneLINK HDMI interface and ships with a primed front frame, so an installer can paint the visible surround to match the wall. Behind tempered safety glass that frosts opaque when the camera is off and clears when it powers on, a 1/2.8-type Exmor CMOS sensor and a 10x optical lens produce 1080p/60 video across a 73-degree wide view that closes to 6.6 degrees at full zoom. Pan covers plus or minus 31 degrees and tilt runs plus 18 to minus 30 degrees at up to 90 degrees per second.

The bundled OneLINK HDMI interface carries power, HDMI video, and control between the recessed camera and the rack over a single Cat cable up to 328 feet (100 m), simplifying an in-wall install where the camera has no local connections. The system ships as the camera and back-box, a primed smart-glass front frame, left and right interior side plates, drywall mounting hardware, the Vaddio IR Remote Commander, the OneLINK HDMI interface, a 48V power supply, an EZCamera RS-232 control adapter, and installation and quick-start guides.