Shure SLXD14 93 Wireless Lavalier System
The Shure SLXD14/93 is a complete digital wireless lavalier system pairing the WL93 subminiature omnidirectional condenser lavalier with the SLXD1 bodypack transmitter and the single-channel SLXD4 receiver. The tiny WL93 capsule disappears on a lapel or collar for presenters, worship leaders, and video work, and its omnidirectional pattern keeps the voice even as the wearer turns their head. SLX-D carries transparent 24-bit digital audio across a 20 Hz to 20 kHz range with a 120 dB dynamic range and 3.2 ms of latency.
The system tunes across a wide RF range and lets you run up to 32 compatible channels within one 44 MHz band, with a working range of about 100 m (330 ft). One-touch IR sync pairs the bodypack to the receiver, and the SLXD1 runs up to 8 hours on two AA batteries or an optional SB903 lithium-ion pack. It ships with two AA batteries, two quarter-wave antennas, two bulkhead adapters, two BNC cables, a power supply, a zippered bag, and rack-mount hardware, and is offered in the G58, H55, and J52 frequency bands.
| System | SLXD4 receiver, SLXD1 bodypack, WL93 lavalier |
|---|---|
| Microphone | WL93 subminiature omnidirectional lavalier |
| Working Range | 100 m (330 ft) |
| Audio Frequency Range | 20-20,000 Hz (microphone dependent) |
| Dynamic Range | 120 dB (A-weighted, typical) |
| System Latency | 3.2 ms |
| Channels | Up to 32 per 44 MHz band |
| Battery Life | Up to 8 hours (2 AA) or optional SB903 Li-ion |
| Frequency Bands | G58 (470-514 MHz), H55 (514-558 MHz), J52 (558-616 MHz) |
| Sensitivity | -38 dBV/Pa (13 mV) (WL93) |
| Max SPL | 120 dB (WL93) |
| Impedance | Receiver : 150 Ω (mic) / 400 Ω (line); 1/4 in.: 1.3 kΩ |
| Connector | Receiver: XLR and 1/4 in. (6.35 mm) balanced outputs; SLXD1 bodypack: TA4M 4-pin mini input |
| Power | Receiver: 15 V DC @ 600 mA external power supply; transmitter: 2 x 1.5 V AA or SB903 rechargeable Li-Ion |
| Weight | SLXD4 receiver 816 g (without antennas); SLXD1 bodypack 89 g |
| Included | (2) AA batteries, (2) 1/4 wave antennas, (2) bulkhead adapters, (2) 22 in. BNC cables, power supply, black vinyl zippered bag, short and long rack mount brackets, linking plate, hardware kit, (4) adhesive feet |





