Martin Audio ADORN ACS-55TS 5.25" Shallow Ceiling Speaker
The ACS-55TS is the shallow-backcan version of the 5.25" ADORN ceiling speaker. The driver complement, power rating, taps and coverage all match the standard ACS-55T, but the can is 100mm deep instead of 192mm, which is the difference between fitting and not fitting above a plasterboard ceiling with ductwork running through it.
The shorter cabinet costs you low end, and the datasheet says so plainly: response starts at 117Hz rather than 98Hz, with the -10dB point at 79Hz. For speech, background music and paging in an office fit-out that is entirely reasonable, and a subwoofer covers the rest where music matters. It is 16 ohm, 50W AES, crossing at 3kHz with auto-resetting fuses, with 70V taps at 30, 15, 7.5 and 3.75W and 100V taps at 30, 15 and 7.5W. Two tile rails, a C-ring backing plate and a cut-out template are included.
| Type | Compact passive two-way shallow ceiling speaker, ported bass reflex |
|---|---|
| Frequency Response | 117Hz - 20kHz +/- 3dB, -10dB at 79Hz |
| Drivers | LF 5.25" coated paper cone with 1" voice coil, HF 0.75" silk dome |
| Rated Power | 50W AES, 200W peak |
| Sensitivity | 90dB / 1W (4V) / 1m |
| Maximum SPL | 113dB peak |
| Nominal Impedance | 16 ohms |
| Transformer Taps | 70V: 30 / 15 / 7.5 / 3.75W, 100V: 30 / 15 / 7.5W |
| Dispersion | 150 deg conical up to 7kHz |
| Cut-out / Depth / Weight | 222mm (8.74") hole, 100mm backcan, 2.8kg (6.2lbs) |









