The Control 60PS/T is a pendant subwoofer with crossover, from the Control Contractor installed range. Transducers are 200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former. Nominal coverage is 140 degrees conical. Frequency range is 42 Hz - 350 Hz. JBL rates it at 300 Watts Continuous Program Power, 100 hrs 150 Watts Continuous Pink Noise, 100 hrs. Maximum SPL at 1 m is 107 dB @ 1 m (3.3 ft) average, 113 dB peak.

The grille is Zinc-plated steel grille with powder-coat finish, foam backing (grille and grille backing are removable for painting). Transformer taps are 110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8. Connections are Six removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included. Environmental rating: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splash-proof rating. It measures 333 mm (13.1 in) diameter, 344 mm (13.6 in) height to top of cabinet. 369 mm (14.5 in) to top of suspension bracket. Net weight is 7.6 kg (16.7 lb).

Type	Pendant Subwoofer with Crossover
Frequency Range (-10dB)	42 Hz - 350 Hz
Frequency Response (+/-3 dB)	55 Hz - 125 Hz
Power Rating	300 Watts Continuous Program Power, 100 hrs 150 Watts Continuous Pink Noise, 100 hrs
Nominal Sensitivity (2.83V/1m)	88 dB
Maximum SPL (1m)	107 dB @ 1 m (3.3 ft) average, 113 dB peak
Impedance	8 ohms
Transformer Taps	110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8
Transformer Insertion Loss	0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110W