Crestron PC-350V Vertical Networked Power Controller and Conditioner
The PC-350V mounts vertically in the rack and takes up no rack units, which is the point of it: a 12 or 18 outlet 120V strip that hides in the side channel and still gives every outlet its own switch, its own power cycle delay, and its own current reading. Surge protection, EMI and RFI filtering, wiring fault detection, and adjustable under and over voltage cutoffs sit ahead of the outlets, so a bad line shuts the load down instead of reaching it.
A 10/100 Ethernet port carries setup and control from a browser, a Crestron control system, XiO Cloud, or SNMP, and a 2-pin terminal block takes an external temperature sensor. Front LEDs call out line power, fault, surge protection status, and shutdown cause, and a thermal breaker resets by hand after an overload. Mounting brackets are in the box; the 9.8 ft detachable cord ends in a NEMA 5-15P.
| Power - Line Power | 12A @ 120VAC, 60 Hz |
|---|---|
| Power Conditioner - Maximum Output Current, Total | 12A @ 120VAC |
| Power Conditioner - Joule Rating | 3640 Joules |
| Communications - Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SNMP, web server, web UI setup and control, Crestron control system integration, XiO Cloud monitoring |
| Power Conditioner - Maximum Output Current, Per Outlet | 12A @ 120VAC (subject to a maximum total output current of 12A for all outlets combined) |
| Construction - Mounting | 0 RU vertically rack-mounted (mounting brackets included) |
| Dimensions - Height | 48.10 in. (1221 mm) |
| Weight | 11.8 lb (5.35 kg) |








