Crestron DIN-PWS60 DIN Rail 60 Watt Cresnet Power Supply
The Crestron DIN-PWS60 is a DIN Rail 60 Watt Cresnet Power Supply. It snaps onto a standard 35 mm DIN rail inside an electrical enclosure, so the lighting and control hardware for a floor or a residence assembles as a panel instead of a rack.
Power consumption is 70 Watts at full rated output. NET: (6) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet power output ports with data pass-through; Maximum Wire Size: 14 AWG (1.5 mm2). Heat Dissipation: 26 BTU/hr. Cresnet carries both power and data to the module over a four-conductor run, and the panel reports to a Crestron control processor or to Crestron Home.
| Power Consumption | 70 Watts at full rated output |
|---|---|
| NET | (6) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet power output ports with data pass-through; Maximum Wire Size: 14 AWG (1.5 mm2) |
| Heat Dissipation | 26 BTU/hr |
| Temperature | 32 deg to 104 deg F (0 deg to 40 deg C) |
| Output Rating | 60 Watts (2.5 Amps) at 24 Volts DC, regulated, limited power source |
| Ripple/Noise | <1% |
| Efficiency | 85% |
| Line Power/Mains | 200 VA (2 Amps maximum) at 100-277 Volts AC, 50/60 Hz |










