Atomos TX Wireless Video Transmitter
The Atomos TX is the transmitter half of the Atomos wireless video system, for shooters who already have a receiver, such as an RX unit, a Shinobi 7 RX monitor, or a Ninja TX with wireless built in, and just need to add a camera to the network. It clips onto the camera and sends up to 4Kp30 over HDMI or 1080p60 over SDI across 5GHz Wi-Fi engineered to resist interference on a busy set.
Range runs up to 300 meters (985 feet) line of sight at roughly 60ms of latency, and a single TX can feed up to four receivers at once, useful for sending one camera's feed to multiple monitors or operators. It takes a 3G-SDI and HDMI input with an HDMI loop-through, and it powers from an NP-F battery, USB-C, or 9-16V DC input to match whatever the rig is already carrying. Atomos part number ATOMTXSL01.
| Type | Wireless video transmitter for the Atomos RX receiver |
|---|---|
| Video Support | Up to 4Kp30 over HDMI; up to 1080p60 over SDI |
| Wireless | 5GHz Wi-Fi |
| Range | Up to 300m (985ft) line of sight |
| Latency | Approximately 60ms |
| Receiver Capacity | Feeds up to 4 receivers per transmitter |
| Connectors | 1x 3G-SDI, 1x HDMI in, 1x HDMI loop-through |
| Power | NP-F battery, USB-C, or 9-16V DC |
| Dimensions / Weight | 42 x 67 x 120mm; 231g |
| Atomos Part # | ATOMTXSL01 |













