AMX SVSI NMX-DEC-N2622S 4K60 MWC/Dante AV-A Multi-Codec Decoder
The NMX-DEC-N2622S is a cost-effective decoder for AMX SVSI's N2600 AV-over-IP line, built for classrooms, meeting spaces, courtrooms and bars where a display just needs to pull a stream off the network. It decodes the sub-2ms-latency 4K60 4:4:4 MWC codec output from N2600 encoders for the highest quality feed, and can drop to a high-compatibility, low-bandwidth 1080p H.26x decode when the network is congested.
A Virtual Network USB 2.0 Hub combines USB signals from up to four decoders back to one host, useful for shared peripherals across a multi-display room. Networking supports multicast, VLAN tagging and QoS, and the unit runs on PoE+ with a low-power mode, controlled through an open Direct-Control API. It carries UL2043 plenum-space certification for above-ceiling installs.
| Video Output | HDMI, up to 4096 x 2160 |
|---|---|
| Video Input | Network video over Ethernet (RJ45) |
| Audio | Network PCM or Dante audio in; embedded HDMI or balanced analog stereo out |
| Codec | 4K60 4:4:4 MWC (sub-2ms latency) or 1080p H.26x |
| Networking | Gigabit Ethernet with PoE+, multicast, VLAN tagging, QoS, Dante AV-A |
| Ports | 2x USB Type-A HID, USB 2.0 device port, IR, RS232, audio terminals |
| Dimensions | 1 1/16 x 7 7/8 x 5 in (26.6 x 200 x 127 mm) |
| Weight | 2.16 lb (0.97 kg) |






