AMX SVSI NMX-ENC-N2612S 4K60 MWC/Dante AV-A Dual-Stream Encoder
The NMX-ENC-N2612S is the encoder side of AMX SVSI's cost-effective N2600 line, taking two switchable HDMI inputs and putting them on the network as both a sub-2ms-latency 4K60 4:4:4 MWC stream for full-quality distribution and a high-compatibility, low-bandwidth 1080p H.26x stream for viewers on a congested or Wi-Fi network, at the same time from the same box.
Audio follows the video path, taking embedded HDMI audio or a balanced analog stereo input and putting it on the network as PCM or as a Dante AV-A stream, so the encoder can sit on a Dante-based audio system without a separate interface. Control runs over an open Direct-Control API or HControl, with multicast, VLAN tagging and QoS support for real network deployments, and the unit is PoE+ powered with a low-power mode.
| Video Inputs | 2 HDMI, switchable |
|---|---|
| Video Output | Network video over Ethernet (RJ45), HDMI loop-out |
| Resolution | Up to 4096 x 2160 |
| Codec | 4K60 4:4:4 MWC (sub-2ms latency) simultaneous with 1080p H.26x |
| Audio | Embedded HDMI or balanced analog stereo in; network PCM or Dante AV-A out |
| Networking | Gigabit Ethernet with PoE+, multicast, VLAN tagging, QoS |
| Dimensions | 1 1/16 x 7 7/8 x 5 in (26.6 x 200 x 127 mm) |
| Weight | 2.16 lb (0.98 kg) |






