Vaddio RoboSHOT 20 UHD OneLINK Bridge System
The RoboSHOT 20 UHD is a 4K pan/tilt/zoom camera that captures native 2160p/30 (3840 x 2160) from a 1/2.3-type Exmor R sensor, combining a 12x optical zoom with a 1.67x digital extension for a 20x total range. A 74-degree wide field of view opens up for the whole room and closes to 4.8 degrees at full tele to pull a tight shot from across a hall, and the camera puts out HDMI, HDBaseT, 3G-SDI, and an IP stream simultaneously.
This system bundles the camera (silver/black) with the OneLINK Bridge interface, which runs power, control, and video to the camera over one category cable up to 100 m and breaks out USB 3.0, HDMI, and SDI at the rack. In the box you get the RoboSHOT 20 UHD camera, a black Thin Profile Wall Mount with hardware, the Vaddio IR Remote Commander, the OneLINK Bridge, a 48V power supply, phoenix connectors, a 6 ft USB 3.0 cable, an EZCamera RS-232 adapter, and the quick-start guides.
| Sensor | 1/2.3-type Exmor R CMOS (9.03 MP total) |
|---|---|
| Resolution | 2160p/30 (3840 x 2160) UHD |
| Zoom | 12x optical, 20x total with 1.67x digital |
| Horizontal Field of View | 74 degrees (wide) to 4.8 degrees (tele) |
| Camera Outputs | HDMI, HDBaseT, 3G-SDI, IP streaming (simultaneous) |
| Interface | OneLINK Bridge (USB 3.0, HDMI, SDI over one Cat cable up to 100 m) |
| Power to Camera | 48V via OneLINK Bridge |
| Included | RoboSHOT 20 UHD camera, Thin Profile Wall Mount (black), IR Remote Commander, OneLINK Bridge, 48V power supply, phoenix connectors, 6 ft USB 3.0 cable, EZCamera RS-232 adapter, Quick-Start Guides |









