Turbosound PQ15 15" Two-Way Passive Loudspeaker

The PQ15 is the 15" cabinet in the Turbosound PQ line, a two-way passive box aimed at live production rather than fixed install. Ferrite motors keep the cost down where weight matters less than budget, and the pattern is fixed at 80 by 50 degrees.

The passive crossover splits a ferrite low frequency driver and a compression driver across a fixed 80 by 50 degree pattern, and the whole cabinet presents a single 8 ohm load to one amp channel. Continuous ratings are quoted separately for LF, HF and full range so a bi-amped rack can be specified against the same sheet.

Type	2-way passive full range loudspeaker
Frequency response (+/-3 dB)	70 Hz - 20 kHz
Frequency response (-10 dB)	45 Hz - 20 kHz
Nominal dispersion (-6 dB)	80 degrees H x 50 degrees V
Power handling (IEC)	LF 500 W, HF 50 W, full range 550 W continuous
Peak power	LF 2000 W, HF 200 W, full range 2200 W peak
Sensitivity (1 W @ 1 m)	99 dB
Maximum SPL (full range)	132 dB, 138 dB peak
Impedance	8 ohms
Components	1 x 15" (380 mm) ferrite LF driver
Dimensions (H x W x D)	712 x 430 x 383 mm (28.0" x 16.9" x 15.1")
Net weight	27.0 kg (59.52 lbs)