RGBlink logo
Shop all RGBlink

RGBlink mini-ISO 10-Channel All-in-One Switcher

The mini-ISO packs ten input channels into a box you can carry in one hand: four HDMI 2.0 inputs that accept up to 4K60 (HDCP 1.4), four 3G-SDI inputs on BNC for the cameras already cabled in a venue, one UVC channel over USB and one NDI channel off the network. That mix is the point. Most switchers this size force a choice between SDI cameras and HDMI computers, and the mini-ISO takes both plus a webcam and a network source at the same time.

Two HDMI 1.3 outputs carry a multi-view preview, the program, or a test pattern to a monitor, and a USB output presents the program to a laptop as a webcam in YUY2 or MJPEG for Zoom, OBS or vMix. Program can also be recorded straight to a USB drive as MP4 at up to 16 Mbps (FAT32 up to 32 GB, exFAT from 64 GB to 2 TB) or streamed over RTMP(S) to four platforms at once. Operation runs through a 3.5 inch touchscreen, with 15 transition effects, picture-in-picture, chroma and luma keying, and IP VISCA control with saved presets for PTZ cameras. It runs on 12V 2.5A over a PD-capable supply.

Video Inputs10 channels: 4x HDMI 2.0 up to 4K60 (HDCP 1.4), 4x 3G-SDI (BNC), 1x UVC, 1x NDI
Video Outputs2x HDMI 1.3 for multi-view Preview, Program or Test Pattern; 1x USB output (UVC webcam, YUY2 / MJPEG)
Screen3.5 in LCD touchscreen
RecordingMP4 to USB drive, up to 16 Mbps (FAT32 up to 32 GB / exFAT 64 GB to 2 TB)
StreamingRTMP(S) to 4 platforms simultaneously; NDI encoding; TAO Cloud control
Transitions15 transition effects
EffectsMulti-view preview, picture-in-picture, chroma key, luma key
PTZ ControlOn-board PTZ control, IP VISCA protocol with preset positions
Power12V 2.5A, PD protocol supported
Dimensions196.9 x 112.7 x 60.3 mm
RGBlink mini-ISO: 10 Video Channels
RGBlink mini-ISO Input & Output