Draper Targa 106" (52 x 92) 16:9 HDTV ClearSound White Weave XT900E Electric Projection Screen

The Draper Targa is an electrically operated, surface-mounted projection screen with a 106-inch diagonal (52 x 92 inch) 16:9 HDTV viewing surface. The screen rolls straight up and down from a motor-in-roller - there is no tab-tensioning - with the fabric kept flat by a weighted dowel along the bottom edge. The roller and motor sit in a one-piece 22-gauge steel case with a flat back and endcaps that double as universal wall or ceiling hanging brackets; the case is about 5-7/8 inches high by 5-1/4 inches deep and comes in a scratch-resistant white finish, with black available.

The standard motor mounts inside the roller on rubber isolation insulators and runs on 110-120V, with a three-position wall switch that stops or reverses the screen at any point. The surface is Draper's ClearSound White Weave XT900E (0.9 gain), an acoustically transparent weave that lets you place loudspeakers behind the screen. A quiet motor and Draper's LVC-IV low-voltage controller are available; part numbers run from 116299 through 116299QU.