Draper Premier 120" (72 x 96) 4:3 Grey XH600V Electric Projection Screen
The Draper Premier is a tab-tensioned electric projection screen with a 120-inch diagonal (72 x 96 inch) 4:3 viewing surface. RF-welded tabs run down both edges to pull the fabric flat and keep it wrinkle-free, so the geometry stays true across the whole image - which matters when a data or graphics projector will expose any ripple. The surface rolls into a black pentagonal steel case, about 5-7/8 inches high by 5-1/4 inches deep, that mounts to a wall or ceiling; the image area is fully framed in black and sits below a standard 12-inch black drop.
The screen runs from a motor-in-roller mounted on vibration insulators for quiet travel and ships with a 110-120V three-position wall switch as standard. This size uses Draper's Grey XH600V (0.6 gain), a neutral grey surface that lifts contrast in rooms with some ambient light. A quiet motor and Draper's LVC-IV low-voltage controller are available on any surface; part numbers run from 101271 through 101271QU.
| Surface Options | Grey XH600V (0.6 gain) |
|---|---|
| Viewable Image | 120 in diagonal, 72 x 96 in |
| Aspect Ratio | 4:3 (Video / NTSC format) |
| Tab-Tensioning | RF-welded tabs; tabs warranted against separation for five years |
| Motor | Motor-in-roller on vibration insulators; optional quiet motor |
| Case | Black pentagonal steel, 5-7/8 in high x 5-1/4 in deep |
| Masking / Drop | Image area fully framed in black; standard 12 in black drop |
| Control | Standard 110-120V 3-position switch; optional LVC-IV low-voltage controller |







