Chauvet Professional PowerStream 4 powerCON Splitter

On a pre-rigged truss the cable count, not the fixture count, is what slows a load-in. The PowerStream 4 takes one Neutrik powerCON feed and breaks it into four locking outputs plus a power-through connection, so a section of truss is fed by a single cable run and each fixture gets a short jumper instead of its own long line back to the distro.

It is deliberately simple: no switching, no metering, nothing to fail in a truss over an audience. Input is auto-ranging 100 to 240 VAC at 50/60 Hz, and the unit is rated for a maximum load of 20 A per connector and 20 A total. The housing is steel, rated IP20 for dry locations, and at 8.4 x 2.4 x 3 inches and 1.7 lb it mounts inside a truss chord without adding meaningful weight to the rig.