Chief PWRUB Large Flat Panel Swing Arm Wall Display Mount, 25 in Extension
A swing-arm mount for the room where the display has to be seen from more than one place - a boardroom with a long table, a bar, a treatment room. It pulls 24.88 inches off the wall and swivels up to 90 degrees left or right depending on screen size, then latches positively back into the home position so the panel sits tight to the wall when nobody is using it.
Chief's Centris tilt sets by fingertip across +5 to -15 degrees, and 6 inches of integrated lateral shift left and right lets you centre the screen on the room rather than on the studs (it ships shifted 2.5 inches to the left). The Q-Latch system secures the panel with a latching flag, CableTrac channels the cable run along the arm, and mounting guides come in the box. Sized for 16 inch on-centre wood studs; metal-stud and in-wall versions exist separately. Depth and extension figures exclude the interface bracket, which adds 0.5 to 1.5 inches.
| Display size | 32 - 65 in (813 - 1651 mm) |
|---|---|
| Weight capacity | 125 lb (56.7 kg) |
| VESA mounting pattern | 200 x 200 mm - 862 x 517 mm |
| Extension | 24.88 in from wall; minimum depth 3.38 in (8.6 cm) |
| Swivel | Up to 90 degrees left or right, depending on screen size |
| Tilt | +5 / -15 degrees (Centris) |
| Lateral shift | 6 in left and right (ships shifted 2.5 in left) |
| Wall stud compatibility | 16 in (406 mm) on centre; TAA compliant |











