TurtleAV USB-C 4K60 Video and USB 2.0 Extender Kit
Extender Kit 2 goes further than the data-only Kit 1: it carries HDMI 2.0b video up to 4K60 alongside a USB 2.0 data channel, over a single CAT cable, with Power over Cable so the far end does not need its own outlet. That combination is built for a USB-C laptop or capture source that needs to reach a display or a room PC that is farther away than an active HDMI or USB cable can reliably run.
Video bandwidth is 18Gbps with HDCP 2.3 compliance and full HDR passthrough (HDR10, HDR10+, Dolby Vision, HLG), and the transmitter/receiver pair reaches 130ft at 4K60 or 230ft if the source steps down to 4K30. Audio formats up to Dolby Atmos and DTS:X pass through with the video. The metal enclosure and Turtle Aqua finish match the rest of the extender line.
| Video | HDMI 2.0b, HDCP 2.3, up to 4K@60Hz (4:4:4 8-bit) |
|---|---|
| Video Bandwidth | 18Gbps |
| HDR Support | HDR, HDR10, HDR10+, Dolby Vision, HLG |
| USB | USB 2.0 |
| Audio Formats | LPCM 2.0/5.1/7.1CH, Dolby True HD, Dolby Atmos, DTS-HD Master Audio, DTS:X |
| Transmission Distance | 4K60Hz up to 130ft/40m; 4K30Hz up to 230ft/70m |
| Dimensions / Weight | 120mm W x 113mm D x 25.5mm H; TX 353g, RX 352g |
| Power Consumption | 51.36W with USB; 10.08W without USB |



