Shure MX396/C-DUAL Microflex Multi-Element Boundary Microphone, Black, Cardioid, Bi-Color LED
The Microflex MX396 puts two or three cardioid elements in one compact boundary mic, so a single unit covers end of table (300 degrees), center of table (360 degrees) or cross-table (bidirectional) seating. Each element has its own audio output.
It has a bi-color status indicator, a programmable mute switch, logic I/O for remote LED and mute control, and CommShield. The MX396/C-DUAL is the version with two cardioid elements for 0 - 180 degree coverage, back or bottom cable exit, mute output and LED input; it needs two mixer channels.
- Output Impedance170 Ω
- Output ConfigurationActive Balanced
- Frequency Response50 to 17000 Hz
- Polar PatternCardioid (x2)
- Sensitivity-35 dBV/Pa (18 mV) (@ 1 kHz, open circuit voltage)
| Type | Electret |
|---|---|
| Frequency Response | 50 to 17000 Hz |
| Polar Pattern | (x2) |
| Output Impedance | 170 Ω |
| Output Configuration | Active Balanced |
| Sensitivity | -35 dBV/Pa (18 mV) (@ 1 kHz, open circuit voltage) |
| Maximum SPL | 122 dB (1 kHz at 1% THD, 1 kΩ load) |
| Self Noise | 30 dB SPL (A-weighted) |
| Signal-to-Noise Ratio | 64 dB (Ref. 94 dB SPL at 1 kHz) |
| Dynamic Range | 92 dB (1 kΩ load, @ 1 kHz) |
| Common Mode Rejection | 45 dB, minimum (10 to 100,000 Hz) |
| Clipping Level | -7 dBV (0.5 V) (at 1% THD) |
| Mute Switch | -50 dB minimum |
| Logic Connections | LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V; LOGIC-OUT: Active low (≤0.5V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 24V (up to 50V through 3kΩ) |
| Cable | 6.1 m (20 ft), attached, unterminated, three shielded audio pairs and three shielded conductors for logic control |
| Weight | 594 g (1.3 lbs) |
| Environmental Conditions | Operating Temperature: -18 to 57°C (0 to 135°F); Storage Temperature: -29 to 74°C (-20 to 165°F); Relative Humidity: 0 to 95% |
| Power Requirements | 48 to 52 V DC, 19.0 mA |









