Crestron logo
Shop all Crestron

Crestron 1 Beyond IV-CAM-I12D-B Intelligent 4K Dual Camera Speaker Tracking Solution

The i12D is a single-bar speaker tracking solution: two 1/2.8 4K Sony CMOS sensors, a 12x optical PTZ block and a 110 degree reference camera, with the visual AI running on board. It handles speaker tracking, group framing, conversation mode and intelligent switching itself, which removes the separate tracking appliance a dual-camera setup would otherwise need. Up to 512 presets are configurable, and audio reference arrives on a balanced 3-pin terminal block so tracking can key off the room microphones.

Outputs are HDMI, USB and RTSP at up to 4K30, with 1080p and 720p modes down to 360p30 over USB. Networking is gigabit Ethernet with AES67 input, VISCA passthrough and VISCA over IP, PELCO-D, PELCO-P and UVC control. The USB-C host port carries video and control to a codec, and the camera is set up through Crestron 1 Beyond Camera Manager 2. Power comes from the PW-2420RU 24 VDC pack rather than PoE, and the matching i12D wall mount bracket is included.

Image Sensors(2) 1/2.8 4K Sony CMOS sensors
Optical Zoom12x; focal length F=34-40.3 mm, iris F1.8-F3.6
Field of ViewPTZ 80.5 degrees horizontal; reference camera 110 degrees horizontal
Intelligent VideoSpeaker tracking, group framing, conversation mode, intelligent switching; 5-25 ft
Video OutputsHDMI, USB, RTSP; HDMI up to 4K30/25, USB up to 4K30/25
PresetsUp to 512 configurable presets
ConnectionsRJ-45 1000 Mbps, HDMI Type A, USB Type-C to host, RS-232/485, balanced audio reference input
PowerPW-2420RU power pack, 24 VDC 2.5 A, 50/60 Hz
Dimensions7.61 in H x 19.69 in W x 6.10 in D (193 x 500 x 155 mm); 9.00 lb (4.08 kg)
The 1 Beyond i12D Camera
Demo of Multi-Camera Switching in 1 Beyond i12 Cameras