Crestron CEN-SWPOE-10 10-Port PoE+ Managed Switch
The CEN-SWPOE-10 is the small end of Crestron's NETGEAR-built AV switch line: eight 1000Base-T ports, every one of them PoE+ at up to 30 W with a 220 W budget across the switch, and two 10 Gigabit Base-X SFP+ ports for the uplink or a fibre run. A 56 Gbps non-blocking fabric means the switch is not the bottleneck in a DM NVX room.
It is built for rooms rather than racks. The chassis is 8.26 by 5.51 in. and 2.13 lb, sits freestanding or screws to a flat surface, and draws 4.7 A at 100-240VAC, consuming 257.7 W at full PoE and 18.14 W with none. Selectable DM NVX and DM NAX profiles configure the multicast behaviour an AV-over-IP system needs in one step rather than port by port, and a streamlined web browser interface, an advanced CLI and LLDP cover the rest of the commissioning. Layer 2 and Layer 3 managed switching, MAC table up to 16K.
| Ports | (8) 10/100/1000Base-T auto-sensing Gigabit Ethernet with PoE+; (2) 10 Gigabit Base-X SFP+ |
|---|---|
| PoE | IEEE 802.3at Type 2 on all Ethernet ports, up to 30 W per port, 220 W total |
| Network Standards | IEEE 802.3af, 802.3at |
| Switch Fabric | 56 Gbps non-blocking |
| MAC Addresses | Up to 16K |
| AV Profiles | Selectable DM NVX and DM NAX AV-over-IP profiles |
| Main Power | 4.7 Amps at 100-240 Volts AC, 50/60 Hz |
| Power Consumption | Max PoE 257.7 W; no PoE 18.14 W; standby 9.51 W |
| Dimensions | 1.57 in. H x 8.26 in. W x 5.51 in. D (40 x 210 x 140 mm) |
| Weight | 2.13 lb (967 g) |












