Shure AD1 Digital Bodypack Transmitter (Axient Digital)
The Shure AD1 is the bodypack transmitter for the Axient Digital wireless platform, built to put reference-grade digital audio on a performer without the dropouts and coordination headaches of older RF. It tunes across an ultrawide window of up to 184 MHz, so a single unit covers a huge slice of the UHF spectrum, and it runs in two modes: Standard for the cleanest coverage and High Density for packing the maximum number of channels into a crowded band. AES-256 encryption keeps the link private for corporate and broadcast work.
The TA4 input accepts Shure lavalier, headset, and instrument sources, and the 1/4-wave antenna detaches for service. Power comes from two AA cells or an SB900A lithium-ion rechargeable pack, with external contacts for docked charging so a bodypack tops up between sets. It is offered in the G57 (470-616 MHz), K54 (606-663 MHz), and X55 (941-960 MHz) tuning bands.
- Storage Temperature Range-29°C (-20°F) to 74°C (165°F)
- RF Output: Channel-to-Channel SpacingStandard Mode: 350 kHz
- Audio Input: Connector4-Pin male mini connector (TA4M) or Lemo Connector
- Audio Input: ConfigurationUnbalanced
- Audio Input: Impedance4-Pin male mini connector (TA4M): 910 kΩ
| Mic Offset Range | -12 to 21 dB (in 1 dB steps) |
|---|---|
| Battery Type | Shure SB900C Rechargeable Li-Ion or LR6 AA batteries 1.5 V |
| Battery Runtime | @ 10 mW; Shure SB900C: up to 11 hours; alkaline: up to 8 hours |
| Dimensions | 86 mm x 66 mm x 23 mm (3.4 in. x 2.6 in. x 0.9 in.) H x W x D |
| Weight | 155 g (5.0 oz.), without batteries |
| Housing | Cast Metal |
| Operating Temperature Range | -18°C (0°F) to 50°C (122°F) |
| Storage Temperature Range | -29°C (-20°F) to 74°C (165°F) |
| Audio Input: Connector | 4-Pin male mini connector (TA4M) or Lemo Connector |
| Audio Input: Configuration | Unbalanced |
| Audio Input: Impedance | 4-Pin male mini connector (TA4M): 910 kΩ; Lemo Connector: 8.2 kΩ |
| Audio Input: Maximum Input Level | 1 kHz at 1% THD; Pad Off: 8.5 dBV (7.5 Vpp); Pad On: 20.5 dBV (30 Vpp) |
| Audio Input: Preamplifier Equivalent Input Noise (EIN) | System Gain Setting ≥ +20; -120 dBV, A-weighted, typical |
| RF Output: Connector | SMA |
| RF Output: Antenna Type | 1/4 wave |
| RF Output: Impedance | 50 Ω |
| RF Output: Occupied Bandwidth | <200 kHz |
| RF Output: Channel-to-Channel Spacing | Standard Mode: 350 kHz; High Density Mode: 125 kHz (varies by region) |
| RF Output: Modulation Type | Shure Axient Digital Proprietary |
| RF Output: Power | 2 mW, 10 mW, 35 mW (varies by region) |
| RF Output: Specific Absorption Rate (SAR) | < 0.20 W/kg |














