Fostex T50RPmk4g+ Planar-Magnetic Gaming Headset with Microphone
The T50RPmk4g+ is the gaming RP headphone with a microphone added to the cable. The transducer side is unchanged from the T50RPmk4g: a fourth-generation RP planar diaphragm at 28 ohms and 97 dB/mW, quoted from 10 Hz to 40 kHz, taking up to 3,000 mW. What is new is the supplied 2 m cable, which carries an electret condenser element so voice and monitoring travel on one lead into a single 4-pole jack.
The mic element is omnidirectional and rated at -37 +/- 3 dB with a 2.2 kohm impedance, which is a normal load for a PC or console input. Adding the mic cable brings the headset to about 370 g, of which roughly 40 g is the cable itself. The housings stay symmetrical, so the lead can be run down whichever side keeps it clear of a keyboard.
| Type | Semi-open dynamic |
|---|---|
| Driver | RP planar magnetic |
| Impedance | 28 Ohm |
| Sensitivity | 97 dB/mW |
| Maximum Input | 3,000 mW |
| Frequency Response | 10 - 40,000 Hz |
| Weight | Approx. 370 g (including approx. 40 g mic cable) |
| Microphone | Electret condenser, omnidirectional |
| Microphone Sensitivity | -37 +/- 3 dB (0 dB = 1 V/Pa, 1 kHz) |
| Microphone Impedance | 2.2 kOhm |
| Included | 3.5 mm (3-pole) to 3.5 mm (4-pole) 2 m mic cable |
| Order Code | AMS-T50RPMK4G-PLUS |













