Crestron CLWI-KPLCN In-Wall Keypad, Cresnet
The CLWI-KPLCN is the keypad that matches the CLWI in-wall dimmers and switches exactly, so a multi-gang plate reads as one piece of hardware rather than an assortment. It draws power and communication from Cresnet, the same four-wire bus that carries the rest of a Crestron lighting system, at half a Watt, which makes it the right choice where an infiNET EX mesh is unnecessary or where a hard-wired link is preferred.
Buttons are field-replaceable and engravable. The face configures as one rocker, or any combination of up to two small rockers and two three-button strips, six positions maximum, and each press is programmable for three discrete actions through single tap, double tap, and press and hold. Faceplates are sold separately. It fits a 1-gang UK BS 4662 or European DIN 49073 box and measures 2.80 by 2.80 by 1.24 inches including the button face.
| Type | In-wall lighting and audio keypad, Cresnet |
|---|---|
| Communications | Cresnet slave port, 4-pin 3.5 mm detachable terminal block |
| Power Requirements | 0.5 Watts (0.02 Amps at 24 Volts DC) over Cresnet |
| Buttons | One rocker, or any combination of up to two small rockers and two three-button strips; six positions maximum; three actions per button via tap, double tap, and press and hold |
| Mounting | 1-gang UK (BS 4662) or European (DIN 49073) electrical box |
| Faceplate | Not included; requires an FP-INTENSE or FP-PURE style faceplate, sold separately |
| Dimensions | 2.80 in (72 mm) H x 2.80 in (72 mm) W x 1.24 in (32 mm) D including the button face |
| Environmental | 32 to 104 degrees F (0 to 40 degrees C), 10% to 90% RH non-condensing |
