Crestron CM2-KPCN Cameo 2 Cresnet Keypad
The CM2-KPCN is the Cresnet version of the Cameo 2 keypad. One four-conductor Cresnet run carries both its 24VDC power and its data, which draws 2 W, and the device runs as a Cresnet client under the control processor. In new construction where the Cresnet home run is already being pulled, that is one less RF hop to design around and one less gateway to buy.
Two NET terminal blocks are wired in parallel so the bus can pass straight through the box to the next device without a splice. A separate 4-pin INPUT block gives two digital or analog input ports rated 0-24VDC, useful for a door contact, an occupancy sensor or a photocell feeding the same program. Buttons take normal, tap, double-tap and press-and-hold events, with RGB backlit text regions and matching indicator regions. At 0.69 in deep it is the shallowest device in the line. Order it standard engraved in white smooth or as ENGRAVED for custom button legends; a Cameo 2 faceplate is sold separately.
- Dimensions4.06 in. H x 1.75 in. W x 0.69 in. D
- NET Ports(2) 4-pin 3.5 mm detachable terminal blocks
- Auxiliary Inputs(1) 4-pin 3.5 mm terminal block
- Cresnet Power Usage2 W (83 mA at 24VDC)
- CommunicationsCresnet, client mode
| Communications | Cresnet, client mode |
|---|---|
| Cresnet Power Usage | 2 W (83 mA at 24VDC) |
| NET Ports | (2) 4-pin 3.5 mm detachable terminal blocks, paralleled for pass through |
| Auxiliary Inputs | (1) 4-pin 3.5 mm terminal block, (2) digital/analog input ports rated 0 - 24VDC |
| Button Events | Normal, Tap, Double-Tap, Press and Hold |
| Operating Temperature | 32 to 86 deg F (0 to 30 deg C), 10% to 95% RH noncondensing |
| Dimensions | 4.06 in. H x 1.75 in. W x 0.69 in. D (103 x 45 x 18 mm) |











