Crestron CLXI-2DIMU8 8-Channel Universal Dimmer Module, 2 Feeds, 230V
The CLXI-2DIMU8 brings auto-detecting universal dimming to 230 Volt systems. Each of its eight channels reads the connected load and selects reverse or forward phase, or holds a mode you force in software, covering LED, incandescent, magnetic and electronic low-voltage, and 2-wire dimmable fluorescent as well as non-dimmable lighting. Channels are rated 2.5 Amps or 575 Watts each, grouped as two fours at 10 Amps apiece for a 20 Amp, 4,600 Watt module, with a zero Watt minimum load.
The module occupies one space in a CAEN or CAENIB wall enclosure. High-voltage wiring lands on a CLTI terminal block, sold separately, so the feeders can be terminated before the module is fitted, and the low-voltage control busses between adjacent CLXI modules on the supplied interconnect cable to a CAEN-BLOCK.
- Module Interconnect(2) 5-pin 0.156 inch headers, Cresnet and override ports
- Power Requirements230 Volts AC, 50/60 Hz, single-phase; one or two feeds
- Weight3.5 lb
- Type8-channel universal dimmer module, dual feed, 230 Volt
- Load TypesLED, incandescent, magnetic low voltage
| Type | 8-channel universal dimmer module, dual feed, 230 Volt |
|---|---|
| Load Types | LED, incandescent, magnetic low voltage, electronic low voltage, 2-wire fluorescent, and non-dimmable lighting |
| Load Rating | 2.5 Amps (575 Watts) per channel; 10 Amps (2,300 Watts) per group of four; 20 Amps (4,600 Watts) per module |
| Minimum Load | 0 Watts |
| Dimming Modes | Auto load detection, forced reverse-phase, forced forward-phase |
| Power Requirements | 230 Volts AC, 50/60 Hz, single-phase; one or two feeds, 10 Amps maximum per feed |
| Connections | Via a CLTI terminal block, sold separately |
| Module Interconnect | (2) 5-pin 0.156 inch headers, Cresnet and override ports; interconnect jumpers included |
| Enclosure | Occupies one module space in a CAEN or CAENIB wall mount automation enclosure |
| Weight | 3.5 lb (1.6 kg) |










