Tascam TSSD-240A 240GB SSD for the DA-6400
The TSSD-240A is the 240 GB solid-state drive TASCAM specifies for DA-6400 and DA-6400dp recording. Using a qualified drive matters on a 64-channel recorder: the write behaviour of a consumer SSD under sustained multitrack load is what causes a dropped take, and this drive is tested for that duty.
It is a 2.5 inch SATA drive supporting Serial ATA revisions 1.0, 2.0 and 3.0, rated for 20 G peak vibration between 10 and 500 Hz while idle and a 2,000,000 hour mean time between failures. Operating temperature range is 0 to 70 degrees C and storage range is -40 to 85 degrees C. It weighs approximately 63 g and fits the AK-CC25 caddy.
| Weight | Approx. 63g (TSSD-240A, TSSD-480A) Approx. 75g (TSSD-480B) |
|---|---|
| Form Factor | 2.5 inch |
| Interface | Serial ATA Rev.1.0(1.5Gb/s) / 2.0(3Gb/s) / 3.0(6Gb/s) |
| Capacity | 240GB(TSSD-240A) / 480GB(TSSD-480A, TSSD-480B) |
| Vibration tolerance (when idle) | 20 G peak, 10-500 Hz (TSSD-240A, TSSD-480A) 15 G peak, 10-2000 Hz (TSSD-480B) |
| Mean time between failures (MTBF) | 2,000,000 hours |
| Storage temperature range | -40 - 85 deg C (TSSD-240A, TSSD-480A) -55 - 95 deg C (TSSD-480B) |
| Operating temperature range | 0 - 70 deg C |








