201-791-1400 Search Cart

ESE Time Code Products



ESE ES263

ESE ES263 Portable SMPTE Time Code Generator

The ES-263 is a portable, presettable SMPTE Time Code Generator. The microprocessor-based unit can be preset using the front panel mounted controls (only hours and minutes are presettable as seconds and frames are automatically set to 00:00). The ES-263 can generate Time Data or User Bits (User Bits are presettable with hexadecimal values "0 - F"). SMPTE Time Code (unbalanced) is output via a rear mounted RCA and the Video Sync Input (composite video or sync) is via a rear mounted BNC connector. The unit is housed in a small portable enclosure that includes a convenient belt clip. The internal battery provides up to ten hours of operation per charge. An AC/wall adapter/charger is also included. PAL and/or EBU operation can be optionally specified.

  • 2 VPP SMPTE Time Code output (RCA)
  • Video input for synchronization (BNC)
  • Presettable Hours & Minutes
  • Settable Hour & Minute User Bit groups
  • 10 Hour Rechargeable Battery
  • AC Adapter/Charger included
  • Drop-Frame/Non-Drop Frame modes
  • EBU Time Code optional
  • Enclosure includes Belt Clip
  • 3.6"W x 2.3"H x 6"D, 1 lb.

$369.00

FREE UPS SHIPPING

ESE ES267

ESE ES267 LTC to VITC Converter

The ES-267 is designed to read SMPTE or EBU Longitudinal Time Code (EBU is selectable via an internal DIP switch) and convert it to Vertical Interval Time Code, inserted into video looped-thru the unit. An internal DIP switch provides selection of the VITC video lines.

  • Reads SMPTE/EBU LTC Time Code
  • Outputs SMPTE/EBU VITC Time Code
  • Balanced XLR Input
  • 75 Ohm BNC Video Loop-thru
  • Optional Rack Mount

$279.00

FREE UPS SHIPPING

ESE ES269

ESE ES269 VITC to LTC Converter

The ES-269 is designed to read SMPTE or EBU Vertical Interval Time Code (EBU is selectable via an internal DIP switch) and convert it to Longitudinal Time Code. Video may be looped-thru the unit to another device. A video termination switch is provided if the loop-thru function is not needed. An internal DIP switch provides selection of the VITC video line, or Automatic Line Identification (First Good). A +/-1 Frame switch is provided to compensate for different types of LTC displays.

  • Reads SMPTE/EBU VITC Time Code
  • Outputs SMPTE/EBU Longitudinal Time Code
  • Loop-thru Input with Switchable Video Termination
  • +/-1 Frame Function
  • Manual or Automatic Line Detection
  • Optional Rack Mount

$279.00

FREE UPS SHIPPING

ESE ES443U

ESE ES443U 4.0" 8-Digit SMPTE/EBU Reader
42" Wall Mount

This eight digit display unit is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/20 to 10x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included and the Error feature may be turned off via an internal DIP switch. Grounding the "Hold" input (on the rear-mounted terminal block) allows the display to be "frozen". Another input selects whether "Times" or "User Bits" are displayed.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • 4.0" Red LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • 7" H x 42" W x 3.5" D Wall Mount
  • 220-240 VAC (110-120 VAC is standard) & UL options available

$1120.00

FREE UPS SHIPPING

ESE ES452

ESE ES452 Play Speed SMPTE/EBU Reader/Window Dubber
1.75" Rack Mount

The ES-452U is a Video Character Inserter unit which receives an external source of SMPTE/EBU timecode. 8 digits of Time data (Hours, Minutes, Seconds and Frames) and 8 User Bit digits are superimposed onto a video signal looped-thru the unit. On-screen menus allow adjustment of the display Size, Position and Mask Mode (black background on/off and transparent or solid display). The display mode may be changed to display the Time and User bits either Side-by-Side or Stacked, or to display Time or User Bits only. The brightness of the Characters and Background may be individually set via front-panel controls. The display may be turned on/off via a front-panel control. An optional RS-232 interface & Windows Control Panel software may be ordered, which allow remote control of the display modes. The unit will read bi-directionally from 1/20 to 10x play speed (dependent upon the audio/timecode performance of the video player).

  • Inserts SMPTE/EBU Time and User Bits into Video (NTSC/PAL)
  • Reads 1/20 to 10x Play Speed, Bi-Directional
  • Switchable Background Mask, Keyed or Transparent display
  • Characters and Background variable from Black to White
  • Variable Character Size and Position
  • Display Blanking function
  • Battery Back-Up of Settings
  • Optional RS-232 interface for remote control
  • One BNC Video input, Two BNC Video outputs
  • Available Options (call for pricing): Black color, UL approved power supply

$539.00

FREE UPS SHIPPING

ESE ES453U

ESE ES453UE SMPTE / EBU Timecode
Desktop Display

The ES-453U is a microprocessor-based SMPTE Time Code display. This unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits.

If the ESE Time Code Output option is ordered on the ES-453U, a rear-mounted BNC connector will provide access to the TC89 output of Hours, Minutes and Seconds. Up to 100 slave units may be driven, up to 4000 ft away. If the RS-232 Output option is ordered on the ES-453U, the Hours, Minutes, Seconds, Frames, User Bits and Flag bits are output once-per-frame using ESE Format "C". A rear-mounted DB-9 connector is provided.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • .56" Yellow LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • Available Options (call for pricing): Rackmount, UL approved power supply, RS-232 output

$379.00

FREE UPS SHIPPING

ESE LX453U

ESE LX453U SMPTE / EBU Timecode
LX Enclosure

The LX-453U is a microprocessor-based SMPTE / EBU Time Code display. The unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a rugged black powdercoated aluminum desk-top case. The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits.

If the ESE Time Code Output option is ordered, a rear-mounted DB-9 connector will provide access to the TC89 output of Hours, Minutes and Seconds. Up to 100 slave units may be driven, up to 4000' away. If the RS-232 Output option is ordered, the Hours, Minutes, Seconds, Frames, User Bits and Flag bits are output once-per-frame using ESE Format "C", on the rear-mounted DB-9 connector.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • .56" Yellow LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • Available Options (call for pricing): Rackmount, UL approved power supply, RS-232 output

$479.00

FREE UPS SHIPPING

ESE ES491

ESE ES491E VITC Time Code Reader

The ES-491E is designed to read and display SMPTE or EBU Vertical Interval Time Code (EBU is selectable via an internal DIP switch). Hours, Minutes, Seconds and Frames are displayed. Decimal points on the display indicate the Video Field and Drop-Frame mode. Video may be looped-thru the unit to another device. A video termination switch is provided if the loop-thru function is not needed. An internal DIP switch provides selection of the VITC video line, or Automatic Line Identification (First Good). Optional outputs include SMPTE/EBU Longitudinal Time Code (LTC) and RS-232 ASCII outputs. A +/-1 Frame switch is provided with the LTC option to compensate for different types of LTC displays.

  • Reads SMPTE/EBU VITC Time Code
  • Displays 8 Digits of Time or User Bits
  • .56" High Amber Display
  • Loop-thru Input with Switchable Video Termination
  • Field & Drop-Frame Indicators
  • Hold Function
  • Manual or Automatic Line Detection
  • Available Options (call for pricing): Rackmount, UL approved power supply, TC & ASCII Outputs, RS-232C Output

$429.00

FREE UPS SHIPPING

ESE ES493U

ESE ES493U 2.3" 8-Digit SMPTE/EBU Reader
19" Wall Mount

The eight digit display of the ES-493U is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/20 to 10x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included and the Error feature may be turned off via an internal DIP switch. Grounding the "Hold" input (on the rear-mounted terminal block) allows the display to be "frozen". Another input selects whether "Time" or "User Bits" are displayed.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • 2.3" Amber LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • 5" H x 19" W x 3.5" D Wall Mount
  • Available Options (call for pricing): Blue LED Displays, Green LED Displays, Red LED Displays, UL approved power supply

$779.00

FREE UPS SHIPPING

ESE ES263

ESE ES263 Portable SMPTE Time Code Generator

The ES-263 is a portable, presettable SMPTE Time Code Generator. The microprocessor-based unit can be preset using the front panel mounted controls (only hours and minutes are presettable as seconds and frames are automatically set to 00:00). The ES-263 can generate Time Data or User Bits (User Bits are presettable with hexadecimal values "0 - F"). SMPTE Time Code (unbalanced) is output via a rear mounted RCA and the Video Sync Input (composite video or sync) is via a rear mounted BNC connector. The unit is housed in a small portable enclosure that includes a convenient belt clip. The internal battery provides up to ten hours of operation per charge. An AC/wall adapter/charger is also included. PAL and/or EBU operation can be optionally specified.

  • 2 VPP SMPTE Time Code output (RCA)
  • Video input for synchronization (BNC)
  • Presettable Hours & Minutes
  • Settable Hour & Minute User Bit groups
  • 10 Hour Rechargeable Battery
  • AC Adapter/Charger included
  • Drop-Frame/Non-Drop Frame modes
  • EBU Time Code optional
  • Enclosure includes Belt Clip
  • 3.6"W x 2.3"H x 6"D, 1 lb.
$369.00
FREE UPS SHIPPING

ESE ES267

ESE ES267 LTC to VITC Converter

The ES-267 is designed to read SMPTE or EBU Longitudinal Time Code (EBU is selectable via an internal DIP switch) and convert it to Vertical Interval Time Code, inserted into video looped-thru the unit. An internal DIP switch provides selection of the VITC video lines.

  • Reads SMPTE/EBU LTC Time Code
  • Outputs SMPTE/EBU VITC Time Code
  • Balanced XLR Input
  • 75 Ohm BNC Video Loop-thru
  • Optional Rack Mount
$279.00
FREE UPS SHIPPING

ESE ES269

ESE ES269 VITC to LTC Converter

The ES-269 is designed to read SMPTE or EBU Vertical Interval Time Code (EBU is selectable via an internal DIP switch) and convert it to Longitudinal Time Code. Video may be looped-thru the unit to another device. A video termination switch is provided if the loop-thru function is not needed. An internal DIP switch provides selection of the VITC video line, or Automatic Line Identification (First Good). A +/-1 Frame switch is provided to compensate for different types of LTC displays.

  • Reads SMPTE/EBU VITC Time Code
  • Outputs SMPTE/EBU Longitudinal Time Code
  • Loop-thru Input with Switchable Video Termination
  • +/-1 Frame Function
  • Manual or Automatic Line Detection
  • Optional Rack Mount
$279.00
FREE UPS SHIPPING

ESE ES443U

ESE ES443U 4.0" 8-Digit SMPTE/EBU Reader
42" Wall Mount

This eight digit display unit is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/20 to 10x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included and the Error feature may be turned off via an internal DIP switch. Grounding the "Holds" input (on the rear-mounted terminal block) allows the display to be "frozens". Another input selects whether "Times" or "User Bits" are displayed.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • 4.0" Red LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • 7" H x 42" W x 3.5" D Wall Mount
  • 220-240 VAC (110-120 VAC is standard) & UL options available
$1120.00
FREE UPS SHIPPING

ESE ES452

ESE ES452 Play Speed SMPTE/EBU Reader/Window Dubber
1.75" Rack Mount

The ES-452U is a Video Character Inserter unit which receives an external source of SMPTE/EBU timecode. 8 digits of Time data (Hours, Minutes, Seconds and Frames) and 8 User Bit digits are superimposed onto a video signal looped-thru the unit. On-screen menus allow adjustment of the display Size, Position and Mask Mode (black background on/off and transparent or solid display). The display mode may be changed to display the Time and User bits either Side-by-Side or Stacked, or to display Time or User Bits only. The brightness of the Characters and Background may be individually set via front-panel controls. The display may be turned on/off via a front-panel control. An optional RS-232 interface & Windows Control Panel software may be ordered, which allow remote control of the display modes. The unit will read bi-directionally from 1/20 to 10x play speed (dependent upon the audio/timecode performance of the video player).

  • Inserts SMPTE/EBU Time and User Bits into Video (NTSC/PAL)
  • Reads 1/20 to 10x Play Speed, Bi-Directional
  • Switchable Background Mask, Keyed or Transparent display
  • Characters and Background variable from Black to White
  • Variable Character Size and Position
  • Display Blanking function
  • Battery Back-Up of Settings
  • Optional RS-232 interface for remote control
  • One BNC Video input, Two BNC Video outputs
  • Available Options (call for pricing): Black color, UL approved power supply
$539.00
FREE UPS SHIPPING

ESE ES453U

ESE ES453UE SMPTE / EBU Timecode
Desktop Display

The ES-453U is a microprocessor-based SMPTE Time Code display. This unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a desk-top case (rack-mount chassis optional). The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits.

If the ESE Time Code Output option is ordered on the ES-453U, a rear-mounted BNC connector will provide access to the TC89 output of Hours, Minutes and Seconds. Up to 100 slave units may be driven, up to 4000 ft away. If the RS-232 Output option is ordered on the ES-453U, the Hours, Minutes, Seconds, Frames, User Bits and Flag bits are output once-per-frame using ESE Format "C". A rear-mounted DB-9 connector is provided.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • .56" Yellow LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • Available Options (call for pricing): Rackmount, UL approved power supply, RS-232 output
$379.00
FREE UPS SHIPPING

ESE LX453U

ESE LX453U SMPTE / EBU Timecode
LX Enclosure

The LX-453U is a microprocessor-based SMPTE / EBU Time Code display. The unit reads in both forward and reverse direction, from 1/20 to 10x play-speed. The unit features a .56" high yellow LED display and comes standard in a rugged black powdercoated aluminum desk-top case. The unit displays Hours, Minutes, Seconds and Frames, or may be switched to display User Bit digits.

If the ESE Time Code Output option is ordered, a rear-mounted DB-9 connector will provide access to the TC89 output of Hours, Minutes and Seconds. Up to 100 slave units may be driven, up to 4000' away. If the RS-232 Output option is ordered, the Hours, Minutes, Seconds, Frames, User Bits and Flag bits are output once-per-frame using ESE Format "C", on the rear-mounted DB-9 connector.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • .56" Yellow LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • Available Options (call for pricing): Rackmount, UL approved power supply, RS-232 output
$479.00
FREE UPS SHIPPING

ESE ES491

ESE ES491E VITC Time Code Reader

The ES-491E is designed to read and display SMPTE or EBU Vertical Interval Time Code (EBU is selectable via an internal DIP switch). Hours, Minutes, Seconds and Frames are displayed. Decimal points on the display indicate the Video Field and Drop-Frame mode. Video may be looped-thru the unit to another device. A video termination switch is provided if the loop-thru function is not needed. An internal DIP switch provides selection of the VITC video line, or Automatic Line Identification (First Good). Optional outputs include SMPTE/EBU Longitudinal Time Code (LTC) and RS-232 ASCII outputs. A +/-1 Frame switch is provided with the LTC option to compensate for different types of LTC displays.

  • Reads SMPTE/EBU VITC Time Code
  • Displays 8 Digits of Time or User Bits
  • .56" High Amber Display
  • Loop-thru Input with Switchable Video Termination
  • Field & Drop-Frame Indicators
  • Hold Function
  • Manual or Automatic Line Detection
  • Available Options (call for pricing): Rackmount, UL approved power supply, TC & ASCII Outputs, RS-232C Output
$429.00
FREE UPS SHIPPING

ESE ES493U

ESE ES493U 2.3" 8-Digit SMPTE/EBU Reader
19" Wall Mount

The eight digit display of the ES-493U is designed to auto-detect and display SMPTE or EBU time code. It is capable of reading in either direction (forward or reverse) at speeds ranging from 1/20 to 10x play-speed. Setup features allow the unit to display time in either 12 or 24 hour format and to display "User Bits" data. An Error Detection and Correction feature maintains flicker-free operation in the event of poor quality time code. An Error Detection Indicator is also included and the Error feature may be turned off via an internal DIP switch. Grounding the "Hold" input (on the rear-mounted terminal block) allows the display to be "frozen". Another input selects whether "Time" or "User Bits" are displayed.

  • Reads SMPTE & EBU Time Codes
  • Reads Time and User Bits
  • 2.3" Amber LED display
  • Bi-Directional reading, 1/20 to 10x play-speed
  • Error Bypass & Error Indicator
  • Drop-Frame mode indicator
  • "Hold" control
  • 5" H x 19" W x 3.5" D Wall Mount
  • Available Options (call for pricing): Blue LED Displays, Green LED Displays, Red LED Displays, UL approved power supply
$779.00
FREE UPS SHIPPING







G&G Technologies

408 Paulding Avenue

Suite F

Northvale, NJ 07647

800-422-2920 201-791-1400

Send us email Sales Terms & Conditions Your Cart

Better Business Bureau

Not responsible for typographical errors.

©1988-2024 G&G Technologies, Inc. All rights reserved.