Datavideo AD-10 Audio Delay Box
Video paths add latency and audio paths usually do not, so the sound arrives early. The AD-10 fixes that at the desk with a single knob, holding up to 400ms of delay on a stereo pair so lip sync lands where it should. A mic/line switch on the input lets it sit behind a condenser or dynamic mic as easily as behind a mixer feed, and two rows of LEDs show level at a glance.
Input is a single 3.5mm jack carrying mic or line on tip and ring; output is a pair of unbalanced RCA sockets at 600 ohms. It samples at 48 KHz, runs off USB Type-C bus power, and weighs 0.18 kg, so it travels in the same bag as the camera. The USB-C cable is not supplied and any generic USB-C lead will power it.
| Audio Delay | Up to 400 ms |
|---|---|
| Audio Input | 1 x 3.5mm jack, mic or line, 16K ohms |
| Audio Output | 2 x unbalanced stereo RCA, 600 ohms, max +10 dBV |
| Sample Rate | 48 KHz |
| Indicators | 2 rows of LEDs (left / right) |
| Power | USB Type-C, 5V 1A (cable not included) |
| Dimensions (LxWxH) | 151 x 88.5 x 30.7 mm |
| Weight | 0.18 kg |








