dbx iEQ31 Dual 31-Band Graphic EQ/Limiter with Type V NR and AFS
The iEQ31 pairs an analog front end with a digital core, so a room tech gets two 31-band, 1/3-octave Constant Q graphic channels alongside built-in AFS feedback suppression and Type V dynamic noise reduction in a single 1U frame. Boost/cut range switches between 6 and 15 dB per band, and the 24-bit, 48 kHz digital section adds only 2 milliseconds of latency to the signal path.
Inputs and outputs are on 1/4 inch TRS, XLR (pin 2 hot), and Euroblock, handling over +22 dBu at the input and over +20 dBu out. Noise reduction pulls up to 10 dB of dynamic broadband hiss out of the signal without a separate box, and dynamic range runs past 113 dB A-weighted. The chassis measures 3.5 x 19 x 7.9 inches and runs on a universal 120/220-240 VAC supply drawing 17 watts.
| Configuration | Dual 31-band, 1/3-octave Constant Q |
|---|---|
| Boost / Cut | Switchable +6 dB or +15 dB |
| Frequency Response | 20 Hz - 20 kHz, +0.5 / -0.25 dB |
| Dynamic Range | Over 113 dB, A-weighted |
| Noise Reduction | Up to 10 dB dynamic broadband |
| Digital Processing | 24-bit, 48 kHz sample rate, 2 msec latency |
| Input / Output | 1/4 in TRS, XLR (pin 2 hot), and Euroblock |
| Dimensions / Power | 3.5 in H x 19 in W x 7.9 in D; 120/220-240 VAC, 17 W |








