Crestron logo
Shop All Crestron

Crestron GLS-SIM Green Light Sensor Integration Module

The GLS-SIM is a compact interface that connects a sensor directly to a Cresnet network. Cresnet is the four-wire bus that carries both data and 24 VDC to Crestron dimmers, keypads, touch panels, shade controllers and thermostats, and the GLS-SIM lets a sensor join it rather than consuming a control system port.

It installs at the sensor: inside the electrical box or exposed above the ceiling, wired with miniature screw terminals. It works with Crestron GLS-series sensors and with most 24 VDC sensors from any manufacturer, supplying up to 1 A at 24 V to the connected device.

  • Dimensions2.00 in. H x 2.00 in. W x 0.86 in. D
  • Weight2 oz
  • NET(1) 4-pin 5mm detachable terminal block; Cresnet client port
  • ID CODE(2) Rotary DIP Switches
  • Temperature32 deg to 104 deg F (0 deg to 40 deg C)
Dimensions2.00 in. (51 mm) H x 2.00 in. (51 mm) W x 0.86 in. (22 mm) D
NET(1) 4-pin 5mm detachable terminal block; Cresnet client port, connects to Cresnet control network
SENSOR(1) 4-pin 3.5mm detachable terminal block; Sensor input comprised of 24VDC power output and two digital or analog input ports; (referenced to GND)...
ID CODE(2) Rotary DIP Switches; Used for manually setting Cresnet ID; '00' setting enables touch-settable ID (TSID)
Cresnet Power Usage1 W (0.04A @ 24 VDC) Does not include power draw of attached devices.
Temperature32 deg to 104 deg F (0 deg to 40 deg C)
Weight2 oz (46 g)