Shop all Crestron
Crestron DIN-8SW8-I DIN Rail High-Voltage Switch with Digital Inputs
The Crestron DIN-8SW8-I is a DIN Rail High-Voltage Switch with Digital Inputs. It snaps onto a standard 35 mm DIN rail inside an electrical enclosure, so the lighting and control hardware for a floor or a residence assembles as a panel instead of a rack.
Cresnet: 5.4 W (0.23A @ 24VDC). Cresnet: Cresnet secondary mode. Mounting: 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm). Cresnet carries both power and data to the module over a four-conductor run, and the panel reports to a Crestron control processor or to Crestron Home.
| Load Types | Incandescent, Magnetic Low Voltage, Electronic Low Voltage, Neon/Cold Cathode, Fluorescent, Motor (may not be compatible with some high inrush current loads) |
|---|---|
| Maximum Per Channel | 10A incandescent @ 120 to 240VAC, 50/60 Hz; 5A fluorescent @ 120 to 240VAC, 50/60 Hz; 0.5 HP @ 120 to 240VAC, 50/60 Hz; 5A at 30VDC; 16A Resistive |
| Module Total | 80A incandescent @ 120 to 240VAC, 50/60 Hz; 40A fluorescent @ 120 to 240VAC, 50/60 Hz |
| Cresnet Power Usage | 5.4 W (0.23A @ 24VDC) |
| Cresnet | Cresnet secondary mode |
| NET | (2) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet secondary port |
| Mounting | 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm) |
| Heat Dissipation | 18 BTU/hr |
