Teradek Bolt 6 LT Transmitter

The Bolt 6 LT Transmitter is the send-side half of Teradek's lightweight wireless video line, built to mount on a camera cage and push a clean picture out over 3G-SDI or HDMI with less than 0.001 seconds of delay. It carries 1080p60 at 10-bit 4:2:2 HDR over SDI, or steps up to 4K30 HDR over HDMI, and streams to as many as six Bolt 6 or Bolt 4K receivers at once, so one transmitter can feed video village, a director's monitor, and a client tent off a single radio. Bolt 6 adds the newly opened 6 GHz band on top of the existing 5 GHz link, which is the real reason to run it over older Bolt hardware in an RF-crowded venue - those extra channels are clean air nobody else is using yet.

It's sold as a standalone unit so a working kit can add a second camera position, outfit an extra body, or replace a lost or damaged transmitter without buying a whole new TX/RX set. The 750 ft model ships with external V-antennas, or, in the -I variant, with every antenna tucked inside the housing for a lower profile on a compact rig. The 1500 ft and MAX-range units step up to external V+H antennas, and MAX supports an optional array antenna for line of sight out to 5,000 feet. Every tier pairs with any Bolt 6 or Bolt 4K receiver over an AES-256 link with RSA-1024 key exchange, and is configured from the on-unit OLED display, the Bolt Manager box, or the Bolt app over Bluetooth.