Teradek Bolt 6 XT Receiver
The Bolt 6 XT Receiver is the full-bandwidth monitor side of Teradek's Bolt 6 line, pulling up to DCI 4K60 at 10-bit 4:2:2 HDR off a 12G-SDI signal with less than 0.001 seconds of delay - close enough to zero that a focus puller working off the monitor sees the same frame as the operator. The XT chassis carries additional receive antennas over the lighter-duty LT line, which is what buys the range and RF resilience that put it on features and stadium broadcasts rather than run-and-gun jobs, and Bolt 6 opens the 6 GHz band on top of 5 GHz for extra clean spectrum in a crowded venue.
It's sold on its own so a truck can add a monitoring position - a second video village station, a producer's tent - without ordering a full matched set, or swap in a replacement receiver after damage. The 750 ft and 1500 ft tiers are available bare or with a Gold Mount or V-Mount battery plate; the MAX tier, good for up to 5,000 feet of line of sight, ships only with a plate. The link runs AES-256 encryption with RSA-1024 key pairing, and every unit carries an OLED status display and Bolt app control over Bluetooth.
| Video Output | 12G-SDI (BNC, SMPTE 2082-1, 75 Ohm) and HDMI |
|---|---|
| Maximum Resolution | DCI 4K60, 10-bit 4:2:2 HDR |
| Latency | Less than 0.001 seconds |
| Range | 750 ft (10-2302 family), 1500 ft (10-2312 family), or MAX (10-2322 family) |
| Frequency Bands | 5 GHz and 6 GHz |
| Encryption | AES-256 with RSA-1024 key pairing |
| Mount Options | No Mount (750/1500 ft only), Gold Mount, or V-Mount |
| Antennas | External, with extra receive antennas over the Bolt 6 LT chassis |
| Longer-Range Option | 10,000 ft receiver sold separately as Bolt 6 XT 10K RX |














