Shure logo
Shop All Shure

Shure KSM137SL STEREO Matched Pair

The Shure KSM137/SL Stereo is a matched pair of end-address cardioid condensers chosen and boxed together for stereo recording. Each capsule uses an ultra-thin 24-karat gold-layered Mylar diaphragm and a Class A discrete transformerless preamp, so acoustic guitar, drum overheads, piano, and ensemble work come back fast, detailed, and uncolored. The consistent cardioid pattern makes the pair predictable in XY, ORTF, or spaced arrangements.

A three-position pad (0, 15, 25 dB) lets the mics stand up to extremely loud sources, and a three-position low-frequency filter counters rumble and proximity buildup. A subsonic filter removes mechanical rumble below 17 Hz, and each mic runs on 48V phantom power over XLR. The stereo kit ships with two KSM137 microphones, two stand adapters, two windscreens, an A27M stereo microphone adapter for mounting both on one stand, and a carrying case.

  • Output Impedance150 Ω
  • ConnectorThree-pin professional audio (XLR), male, balanced
  • Polar PatternCardioid
  • Frequency Response20 to 20,000 Hz
  • Sensitivity (open circuit voltage, @ 1 kHz, typical)-37 dBV/Pa (14.1 mV)
Cartridge TypeElectret
Polar Pattern
Frequency Response20 to 20,000 Hz
Output Impedance150 Ω
Sensitivity (open circuit voltage, @ 1 kHz, typical)-37 dBV/Pa (14.1 mV)
Maximum SPL (1 kHz at 1% THD)PAD ON: 170 dB (5000 Ω load), 164 dB (2500 Ω load), 159 dB (1000 Ω load); PAD OFF: 145 dB (5000 Ω load), 139 dB (2500 Ω load), 134 dB (1000 Ω load)
Signal-to-Noise Ratio80 dB
Dynamic Range (@ 1 kHz)5000 Ω load: 131 dB; 2500 Ω load: 125 dB; 1000 Ω load: 120 dB
Clipping Level (20 Hz to 20 kHz, 1% THD)5000 Ω load: 15 dBV; 2500 Ω load: 9 dBV; 1000 Ω load: 3 dBV
Self Noise (equivalent SPL, A-weighted, typical)14 dB SPL-A
Common Mode Rejection (10 Hz to 100 kHz)≥50 dB
Attenuator Switch0, -15, -25 dB
Low-Frequency Filter SwitchFlat, -6 dB/octave below 115 Hz, or -18 dB/octave below 80 Hz
ConnectorThree-pin professional audio (), male, balanced
PolarityPositive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power Requirements11 to 52 V DC (IEC-61938), 4.7 mA, maximum
Net Weight100 g (3.5 oz.)

Full specifications on the manufacturer’s site

Shure KSM137 Review
Shure KSM137 vs Rode NT5 - Recording Acoustic Guitar
4items in the box
  • Case (A100C)
  • Stereo Microphone Adapter (A27M)
  • 2 x Windscreen (A100WS)
  • 2 x Stand Adapter (A57F)