Shop All sE Electronics
sE Electronics sE2300 Multi-Pattern Large-Diaphragm Condenser Microphone
The sE2300 is the multi-pattern member of the sE2000 family. The same hand-crafted 1 inch true condenser capsule gets cardioid, omnidirectional and figure-8, so one mic covers a close vocal, a room, and the side of a mid-side pair. Self-noise is 9 dB with 85 dB signal-to-noise.
Switchable 10 and 20 dB attenuation and an 80 or 160 Hz low-cut are on the body, and the 40 Ohm output keeps the signal intact over long runs. It ships with the Isolation Pack shockmount and metal pop filter plus a thread adapter.
- Polar PatternsCardioid, omnidirectional, figure-8
- Frequency Range20 Hz - 20 kHz
- Sensitivity25 mV/Pa (-32 dBV)
- Powering48 V phantom (IEC 61938), 40 Ohms, 3-pin male XLR
- Weight611 g (21.55 oz.)
| Capsule | Hand-crafted 1 inch true |
|---|---|
| Polar Patterns | , omnidirectional, figure-8 |
| Frequency Range | 20 Hz - 20 kHz |
| Sensitivity | 25 mV/Pa (-32 dBV) |
| Max SPL | 125 / 135 / 145 dB (0/10/20 dB pad, 0.5% THD) |
| Equivalent Noise Level | 9 dB |
| Low-Cut Filter | 80 / 160 Hz, 6 dB/oct, switchable |
| Powering | 48 V phantom (IEC 61938), 40 Ohms, 3-pin male |
| Weight | 611 g (21.55 oz.) |
CondenserA microphone type with a powered capsule. Usually more sensitive and detailed than a dynamic.
CardioidA pickup pattern that hears what is in front of the microphone and rejects sound from behind it.
XLRThe three-pin balanced audio connector used on professional microphones and mixers.
