Martin JEM ZR25 Fog Machine, 120V
The JEM ZR25 is the compact machine in JEM's ZR line, sized for club stages, small theatres and permanent installs that need reliable atmosphere rather than a stadium's worth of it. A 1150 W heat exchanger produces 600 cubic metres of fog per minute at full output, and variable output control lets you dial that back to a slow bleed for a scene that only needs the beams to show. Warm-up is seven minutes and the machine holds temperature for continuous running.
The 2.5 litre tank gives about 1.2 hours at full output, and fluid consumption peaks at 100 ml per minute. Control is a single DMX channel with RDM to ANSI/ESTA E1.20, plus the integrated digital remote for installs with no console. Connectors are powerCON TRUE1 for mains, 5-pin XLR for DMX and 3-pin XLR for the remote. The US version runs 100 to 130 V drawing 8.8 A at 110 V, and the chassis measures 485 by 335 by 242 mm at 11.2 kg dry. A hanging bracket lets it sit on the floor or fly on truss.
| Heat Exchanger | 1150 W |
|---|---|
| Fog Output | 600 cubic metres per minute (21,189 cu. ft.) |
| Fluid Consumption | 100 ml per minute maximum |
| Tank Capacity | 2.5 litres, 1.2 hours at full output |
| Ready Time | 7 minutes |
| Control | 1 DMX channel, RDM (ANSI/ESTA E1.20), digital remote |
| Connectors | powerCON TRUE1, 5-pin XLR DMX, 3-pin XLR remote |
| Power (US) | 100 - 130 V AC, 8.8 A at 110 V, 1050 W typical |
| Dimensions / Weight | 485 x 335 x 242 mm, 11.2 kg dry / 13.7 kg filled |












