Martin MAC Encore Performance CLD LED Profile Moving Head

The MAC Encore Performance CLD is the cold-white member of the Encore profile family: a 468 W Martin LED engine at 6000 K feeding a 12 to 48 degree zoom, with CMY mixing, a six-filter dichroic color wheel and variable color temperature control down to 2700 K. Fixture output is 11,600 lumens with CRI above 80, and the framing module rotates plus or minus 55 degrees with four individually controllable blades, so the same unit shapes hard-edged architectural cuts and pulls back to a soft wash. An interchangeable animation wheel and five rotating texture gobos handle the effects work.

The head runs quiet by design, with temperature-regulated convection and forced air cooling and user-definable fan levels, which is why it turns up in theatre and television rigs as often as on tour. Control is 38 DMX channels over 5-pin XLR with RDM, 16-bit on dimming, gobos, zoom, focus, pan and tilt, and absolute position monitoring keeps the head honest after a bump. Power is 120 to 240 V through a Neutrik TRUE1 inlet at 596 W typical. Two omega brackets ship in the box. Order the SIP variant if you need the foam flightcase insert, and the white finish version for exposed installations.