Chauvet DJ Rotosphere HP Mirror-Ball Simulator
A mirror ball needs a motor, a hanging point, and a pinspot; the Rotosphere HP replaces all three with one fixture that sits on a stand or clamps to truss. Ten 7W LEDs throw beams through a rotating faceted head for 360-degree coverage, and the pairing is the interesting part - five quad-color RGBW emitters alongside five CMYO (cyan, magenta, yellow, orange), which produces colour combinations a straight RGBW fixture cannot mix.
Rotation is adjustable from 2 to 19 rpm, slow enough at the bottom end for a first-dance look and fast enough at the top for a club chase. Colour and speed can both be set from the digital display with no controller attached, or from the optional IRC-6 remote; under DMX it takes 3, 12 or 28 channels over 3-pin XLR. It draws 75W at 120V, weighs 9 lb, and includes a mounting bracket with a 13 mm hole.
- Size / Weight11 x 13 x 17 in; 9 lb
- DMX Channels3, 12 or 28; 3-pin XLR
- Power / Cable75W, 0.9A @ 120V; 5 ft power cable
- Weight9 lb
- Light Source10 LEDs (5 quad-color RGBW + 5 CMYO) 7W each, 50
| Light Source | 10 LEDs (5 quad-color RGBW + 5 CMYO) 7W each, 50,000-hour life |
|---|---|
| Coverage Angle | 360° |
| Rotation Speed | 2 to 19 rpm |
| Strobe Rate | 0 to 20 Hz |
| DMX Channels | 3, 12 or 28; 3-pin |
| Control | DMX, digital display stand-alone, optional IRC-6 remote |
| Power / Cable | 75W, 0.9A @ 120V; 5 ft (1.5 m) power cable |
| Size / Weight | 11 x 13 x 17 in (266 x 319 x 419 mm); 9 lb (4.0 kg) |
| Weight | 9 lb (4.0 kg) |













