Blackmagic ATEM Streaming Bridge
The ATEM Streaming Bridge closes the loop on remote streaming from an ATEM Mini Pro. It receives the H.264 stream that an ATEM Mini Pro or Mini Pro ISO sends over a network and converts it back to clean SDI and HDMI video, so a program feed can travel across a building or across the internet and come out as a broadcast signal at the far end. It locks to the incoming stream and outputs HD up to 1080p60, which makes it an easy way to feed a distant monitor, projector or second switcher without laying long video cable.
The outputs are an HD-SDI connection at 1.5G and 3G plus an HDMI type A output, each carrying two channels of embedded 48kHz audio. A reference input accepts black burst or tri-sync for genlock into a larger system, and 10/100/1000 Ethernet brings in the stream while a USB-C port handles configuration and firmware. It runs from the included +12V universal power supply with international socket adapters and draws only 6W.
- Storage Temperature-20° to 60° C (-4° to 140° F)
- SDI Reference Inputs1 x 3G-SDI
- SDI Video Outputs2 x 3G-SDI
- SDI Audio Outputs2 Channels embedded in HD-SDI.
- HDMI Video OutputHDMI type A out.
| SDI Reference Inputs | 1 x 3G- |
|---|---|
| SDI Video Outputs | 2 x 3G-SDI |
| SDI Audio Outputs | 2 Channels embedded in HD-SDI. |
| HDMI Video Output | type A out. |
| HDMI Audio Outputs | 2 Channels embedded in HDMI. |
| SDI Rates | 1.5G, 3G. |
| Reference Input | Black burst and Tri-Sync. |
| Ethernet | Ethernet supports 10/100/1000 BaseT. |
| Updates and Configuration | 1 x USB Type-C for software configuration and software updates. |
| SDI Video Standards | 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 1080i50, 1080i59.94, 1080i60 |
| HDMI Video Standards | 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60 |
| SDI Compliance | SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 424M-B, SMPTE 425 Level A and Level B. |
| SDI Video Sampling | |
| SDI Audio Sampling | Television standard sample rate of 48 kHz and 24 bit. |
| SDI Color Precision | |
| SDI Color Space | YUV |
| Streaming Input | ATEM Streaming Bridge supports video input streamed over ethernet from ATEM Mini and ATEM SDI models. |
| Protocols | RTMP (Web Presenter, ATEM Mini, ATEM SDI) SRT (Web Presenter) |
| Software | Internal software upgrade via updater application. |
| Operating Systems | Mac 14.0 Sonoma, Mac 15.0 Sequoia or later. Windows 10 and 11. |
| Settings Control | Mini Switches or setup utility software when connected by USB. |
| Power Requirements: Power Supply | +12V universal power supply included with international socket adapters for all countries. |
| Power Consumption | 6W max. |
| Operational Voltage Range | 6 - 30V DC. |
| EMC Certifications: Power Supply | EMC, FCC, CE and KCC. |
| Operating Temperature | 0° to 40° C (32° to 104° F) |
| Storage Temperature | -20° to 60° C (-4° to 140° F) |
| Relative Humidity | 0% to 90% non-condensing |
| Source | Full specifications on blackmagicdesign.com |

- ATEM Streaming Bridge
- 12V universal power supply with international socket adapters













