JBL Professional logo
Shop all JBL Professional

JBL Professional JBL SRX910LA Two-way active line array element

The SRX910LA is the larger two-way active array element in the SRX900 family, built for mid to large rooms. Two JBL 261G-1 10-inch neodymium Differential Drive woofers and a 2432H-3 compression driver give 135 dB with 105 degrees nominal coverage from 400 Hz to 16 kHz, and the array preset runs down to 53 Hz. Continuous power is 600 W, 400 W LF and 200 W HF.

Amplification is built in, Class D and passively cooled, on a universal power supply. Two Neutrik etherCON ports carry HARMAN HControl for setup and monitoring, DSP is user-controllable from the rear-panel LCD, and LevelMax limiting uses excursion-control algorithms rather than a simple thermal limiter to keep the transducers inside their range. The enclosure is polypropylene over an aluminium baffle with plywood internal bracing, and the three-point rigging takes inter-enclosure angles from 0.5 to 12 degrees. Each box weighs 59 lb.

TypeTwo-way active line array element
Amplifier designClass D, passively cooled
Continuous power rating600 W (LF 400 W / HF 200 W)
Maximum SPL135 dB
Frequency range (-10 dB)53 Hz - 19 kHz (array preset)
Coverage pattern105 degrees nominal (400 Hz - 16 kHz)
LF drivers(2) JBL 261G-1 10-inch neodymium Differential Drive, dual 2-inch voice coil
HF driver(1) JBL 2432H-3 1.5-inch exit neodymium compression driver, 3-inch voice coil
NetworkDual Neutrik etherCON ports, HARMAN HControl
Inter-enclosure angles0.5 to 12 degrees
EnclosurePolypropylene with aluminium baffle and plywood internal bracing
Dimensions (H x W x D)305 x 716 x 519 mm (12.0 x 28.2 x 20.5 in)
Net weight (each)26.7 kg (59 lb)
JBL SRX900 Series - Technical Overview (2025 Update)
JBL SRX900 Series - Quick Look (2025 Update)